http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
경전선 복선전철 및 부산신항 노반건설공사 중 PDT말뚝 적용성 연구
허억준(Hur Eok-Jun),박재명(Park Jae-Myung),윤수동(Yun Su-Dong),김태훈(Kim Tae-Hoon) 한국철도학회 2007 한국철도학회 학술발표대회논문집 Vol.- No.-
In the past decades, complain about ground vibration and noise induced by pile driving has been quickly increased. Because of that, auger drilled piling methods have frequently used specially in urban area. However, the present auger drilled piling methods induce inevitable ground disturbance as well as a certain degree of vibration and noise due to the final hammering. For these reasons, a new auger drilled piling method is required to be developed. This paper introduces PDT(Pulse Discharge Technology) piling method and presents the characteristics of bearing capacity. The PDT piling method is to install in-situ piles using electric power so called Pulse. The pile installed by PDT appears to be able to develop shaft and end bearing capacity efficiently. This paper introduces PDT(Pulse Discharge Technology) piling method, which is the 512nd new construction technology . The PDT piling method is to install in-situ piles using electrical power so called Pulse power. The pulse power is physical value that indicates the energy change per unit time(dE/dt). Since the pulse power is to push ground, using the pulse power is enable a hole to be expanded as well as the ground to be improved by compaction. Therefore, The pile installed by PDT appears to be able to develop shaft and end bearing capacity efficiently. In this study, couples of pile loading tests were carried out to figure out whether or not the PDT piling method is applicable to constructions like rail road facility . As a result, it was concluded that the PDT piling technique meet the requirements for such a rail road related construction.
지질정보에 대한 정형화 및 Open Street Map 적용사례
황학수,이철우,함세영,허억준 대한지질공학회 2016 대한지질공학회 학술발표회논문집 Vol.2016 No.1
최근 토목, 지하수, 환경, 재해분야 등에서 지질관련정보의 수요 증가와 이들 정보에 대한 효율적 품질관리, 정보관리 및 정보공유를 위하여 데이터베이스 환경 하에서 정보의 정형화뿐만 아니라 더 나아가 빅데이터 환경 하에서 정보관리의 필요성이 대두되고 있다. 물리탐사, 지하수, 지질분야 등에서 자료의 정형화에 대한 여러 연구가 2000년대부터 진행되어 왔다(박삼규등, 2010; 이태섭 등, 2000; 황학수 등 2014a, 황학수 등, 2014b). 이 같은 많은 연구들은 공간적으로 연구그룹 내에서만 그리고 특정 분야에 국한된 자료관리의 수준으로 지질관련 모든 분야의 정보에 대한 총괄적이며 효율적인 정형화에 대한 연구는 수행되지는 않았다. 이 연구는 지질분야를 포함한 관련분야 그리고 GIS 기법의 활용에 있어서 주제도의 효율적 생성까지 확장할수 있는 데이터베이스를 구축하고, 자료의 정형화를 시도하였다. 또한 이를 개발된 소프트웨어와 open street map에 적용하여 통합적 자료관리 및 크라우드 개념의 자료공유에 대한 가능성을 예시하였다. Fig. 1은 관계형 데이터베이스 S/W인 MS Access를 사용하여 구축한 데이터베이스(ClassDB)를 구성한 테이블 간의 관계를 나타낸 것이다. 정규화를 통하여 구축된 데이터베이스는 10개의 테이블로 구성하였다. 지질관련자료는 대분류, 중분류, 소분류로 분류하고 해당 테이블(LargeClass, MiddleClass, SmallClass)에서 unique 필드는 6자리 문자열(예, 대분류의 지구물리는 “030000”, 수리지질은 “040000” 등)로 코드화하였다. 이 unique 필드값은 관계한 다른 모든 테이블을 참조하는데 사용한다. 그리고 소분류에 대한 속성정보 및 자료들은 해당 소분류 코드에 의해 참조하는 7개의 테이블(SmallProcess, SmappCaptionN, SmallFileClass, ColumnHeader,SmallProperty, SmallUnitN, SmallFileFormat)에서 관리한다. 정규화에 의해 구축된 데이터베이스를 적용한 WinSaSo S/W는 MS 윈도우환경에서 프로그래밍 언어 C#4.0을 사용하여 개발하였다. 수집자료의 공간적 정보를 위하여 open street map을 사용하였으며, 공간정보, 수집자료 및 수집 시 정보들은 구축된 데이터베이스(Class DB)와 관계한 또 다른 데이터베이스(Project DB)에서 관리한다. (http://cafe.daum.net/gisops). Fig. 2는 WinSaSo S/W를 이용하여 구축된 데이터베이스를 활용한 예이다. 여기서, (a)는 구축된 데이터베이스로부터 각 소분류별 레이어 생성을 보여주고 있으며, 사용된 폼은 WinSaSo를 구성하는 프로젝트 레이어 생성폼이다. Fig 2 (b)는 소분류별 생성된 레이어를 구성하는 측점들의 공간적위치를 Open street map에 나타낸 것이다. 여기서 분홍색 다이아몬드점들은 대분류가 물리탐사, 중분류가 전기비저항탐사, 소분류로서 1차원 전기비저항탐사가 수행된 측점들이다. 이 같은 각각의 측점에서 수집한 현장자료들은 일정한 형식(자료속성 및 수집정보에 대한 파일형식)을 갖고 프로젝트 데이터베이스에서 관리한다. Fig. 3은 Class DB를 구성하는 테이블들의 필드에 대한 예시이다. 도시한 폼은 Class DB를 관리하고, 또한 지질관련자료에 대한 정형화를 위한 것으로 WinSaSo S/W를 구성하는 하나의 인터페이스 폼이다. 이 폼의 stand-alone 실행파일(윈도우 버전), 소스파일(c#) 그리고 ClassDB 파일은 http://cafe.daum.net/gisops에서 다운로드할 수 있다. 향후 지질정보의 정형화 작업을 포함한 WinSaSo S/W의 처리모듈(예, 전기비저항 1 & 2D역산, TEM 1D역산, EM 1D역산, 중력 및 자력보정 등)을 위한 객체지향 라이브러리로 사용할 수 있도록 DLL (Dynamic Link Library)또는 COM (Component Object Model)으로 제공할 예정이다. 지질정보에 대한 정형화 작업, 특히 소분류별 속성정보 정형화는 시간과 각 분야에 대한 전문적인 지식이 필요한 작업이다. 이 논문의 저자들의 전공은 물리탐사(전자탐사), 수리지질, 토목분야(토질)이지만은 해당분야에 포함된 모든 세부분야에 대한 정형화에는 한계가 있으며, 또한 저자들의 전공 이 외의 분야(예, 구조지질, 지질공학, 지구화학 등)에 대한 정형화 작업은 해당분야 전문가, 학회, 연구원 및 학교차원의 협조가 절실히 요구되고 있습니다. 이와 같은 문제의 해결방법으로 온라인 카페(http://cafe.daum.net/gisops)를 개설하고, 각 분야의 전문가들의 참여를 유도하고 있다. 그러므로 빅데이터 환경을 대비한 지질관련자료의 정형화작업 및 통합적 분석전용 GISS/W 개발에 많은 관심과 협조를 부탁합니다.
앵커 정착 부 확공을 위한 펄스방전의 양상과 작용압력에 관한 연구
신병우 ( Shin Byung-woo ),윤수동 ( Yun Su-dong ),차경섭 ( Cha Kyung Sub ),허억준 ( Hur Eok-jun ) 한국구조물진단유지관리공학회 2008 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.12 No.1
When the electricity is not flowing because the certain distance lies between positive (+) pole and negative (-) pole of electricity, we call the status as the air insulation. When the voltage is gradually increased to this status, the electricity is flowing breaking this insulation status at certain point, which we define as the insulation is broken. When the insulation is broken, big expansion pressure is occurred, which is the essence of technology of pulse discharge of electricity. We are utilizing this technology of pulse discharge of electricity to expand and press the cavity of ground foundation of anchor settlement with the aim of making the anchor body with great pushing power. The results of measuring the pressure at the experiment of chamber model generated are average 8 MPa with 250 mm of diameter (at 5000 voltage applied), and 16 MPa with 110mm (at 3500 voltage applied) respectively. This is direct pressure working to the wall of chamber which is equivalent to the wall of anchor settlement part where the intensity of pressure generated can be adjusted by regulating the voltage. In the future, it shall be verified about applicability to the ground through experiment of electricity discharge on the real ground; and the increase of pushing power through the expansion and press of cavity.
신병우(Shin Byung-Woo),윤수동(Yun Su Dong),김철영(Kim Choel-young),김태훈(Kim Tae-Hoon),허억준(Hur Euk-Jun) 한국구조물진단유지관리학회 2007 한국구조물진단학회 학술발표회논문집 Vol.11 No.1
앵커 정착부를 확공하여 구형모양의 구근을 형성하여 인발력을 증대시키는 펄스방전장치를 개발하여 경제적이고 안정성 있는 앵커시공을 하는데 목적이 있다. 실험을 통해 펄스파워장비의 전기적 특성을 알아내었고, 그에 따른 에너지변화로 발생된 동적압력을 측정하였다. 여기서 측정된 동적압력이 앵커 정착부 주변지반에 충격력을 주는 확공 압력이며, 이 압력은 앵커 정착부 동다짐 효과로 확공 및 천공 면 다짐효과를 주어 보다 큰 마찰저항으로 인발력 증대에 크게 기여할 것으로 추정된다. This study intends to develop a pulse discharge device to strengthen the pushing power by expanding the cavity of the anchor settlement to form a spheric root for the purpose of constructing the economical and stable anchor. Through the experiments, the electrical characteristics of the pulse power equipment had been identified it and the dynamic pressure generated from the subsequent change had been measured. Here, the measured dynamic pressure is the cavity expansion pressure to impact on the ground around the anchor settlement. Since this pressure has effects of cavity expansion and bored surface hardening with dynamic hardening effects on the anchor settlement, it is expected that it will largely contribute the increase of pushing power with a strong frictional resistance.
신병우 ( Shin Byung-woo ),윤수동 ( Yun Su Dong ),김철영 ( Kim Choel-young ),김태훈 ( Kim Tae-hoon ),허억준 ( Hur Euk-jun ) 한국구조물진단유지관리공학회 2007 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.11 No.1
앵커 정착부를 확공하여 구형모양의 구근을 형성하여 인발력을 증대시키는 펄스방전장치를 개발하여 경제적이고 안정성 있는 앵커시공을 하는데 목적이 있다. 실험을 통해 펄스파워장비의 전기적 특성을 알아내었고, 그에 따른 에너지변화로 발생된 동적압력을 측정하였다. 여기서 측정된 동적압력이 앵커 정착부 주변지반에 충격력을 주는 확공 압력이며, 이 압력은 앵커 정착 부동다짐 효과로 확공 및 천공 면 다짐효과를 주어 보다 큰 마찰저항으로 인발력 증대에 크게 기여할 것으로 추정된다. This study intends to develop a pulse discharge device to strengthen the pushing power by expanding the cavity of the anchor settlement to form a spheric root for the purpose of constructing the economical and stable anchor. Through the experiments, the electrical characteristics of the pulse power equipment had been identified it and the dynamic pressure generated from the subsequent change had been measured. Here, the measured dynamic pressure is the cavity expansion pressure to impact on the ground around the anchor settlement. Since this pressure has effects of cavity expansion and bored surface hardening with dynamic hardening effects on the anchor settlement, it is expected that it will largely contribute the increase of pushing power with a strong frictional resistance.