http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
한창운,박승일,오원욱 한국신뢰성학회 2017 한국신뢰성학회 학술대회논문집 Vol.2017 No.5
염료감응형 태양전지는 제작의 단순성, 친환경적 재료 사용, 색상 구현 가능, 반투명성, 실내에서 작동 가능성 등의 이유로 차세대 태양전지의 하나로 많은 연구가 진행되고 있다. 특히 반투명성과 색상성의 장점은 BIPV(Building-integrated photovoltaics) 용도로 적용 가능성을 높이고 있다. 하지만 액체 전해질 사용 등의 이유로 인해 염료감응형 태양전지의 내구성은 아지 개선되어야 할 부분이 많다. 특히 고온 저장성은 타 기술에 비해 취약하다. 최근에 BIPV용 대형 크기의 염료감응형 태양전지가 개발되었다. 개발품의 고온 내구성을 평가하기 위하여 85°C 환경에 저장한 결과, 100시간 후 시편 출력이 80%로 이하로 저하되었다. 시험 후 시편에는 전해질이 누수 현상이 관찰되었다. 고온 내구성을 향상시키기 위하여 모듈에 대해 유한요소모델 해석을 수행하였다. 해석 결과 전극 부위의 응력이 100 MPa 이상으로 분석되었는데, 전극체인 은의 금속상태에서의 극한 강도가 140 MPa임으로 미루어 전극 부위의 응력이 전극 및 봉지제를 파괴하고 누수현상을 만드는 것으로 판단되었다. 이 전극 부위의 응력을 저하시키기 위해서 유한요소모델로 모듈 내셀 너비의 민감성 해석을 수행한 결과 셀 너비가 기존 11 mm에서 18 mm로 증가되면 전극 부위 응력이 현저히 저하됨을 밝혔다. 또한 봉지제와 전해질의 열팽창 계수를 조정함으로써도 응력이 저하됨을 보였다. 이런 설계 신뢰성적 입장에서의 연구결과를 반영하여 모듈을 재설계 및 제작하였다. 새로 제작된 염료감응형 태양전지 모듈은 85°C 환경에서 500시간을 출력 80%로 유지하여 향상된 내구성을 보였다.
한창운,한봉태 대한기계학회 2014 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.28 No.3
Accelerated thermal cycling (ATC) tests are conducted for various chip resistor assemblies using the lead-based (SnPb) and lead-free(SnAgCu) solders. The corresponding life prediction models are developed by employing the well-established energy density approach. The life prediction model constants are obtained from the ATC test data. The models are utilized to predict the lifetimes of chip resistorassemblies under a mobile device field condition. The analysis indicates that the lead-free solder used in the chip resistor assembly wouldoffer a longer lifetime under a field condition compared to the lead-based solder regardless of chip resistor types even when a reversetrend is observed in the ATC test results.
한창운(Changwoon Han),박승일(Seungil Park),이현석(Hyeonseok Lee) 대한기계학회 2018 大韓機械學會論文集A Vol.42 No.5
태양광 발전소는 효율적 전기 생산을 위해 태양전지 모듈을 직렬 및 병렬로 연결한 태양전지 어레이로 구성된다. 어레이를 구성하는 개별 태양광 모듈은 시간에 지남에 따라 열화가 진행되며, 태양광 어레이의 발전효율은 열화가 진행된 모듈의 발전효율에 따라 결정된다. 본 연구에서는 태양전지 모듈을 어레이에서 분리하지 않고, 열화가 진행된 모듈을 검출하는 방법을 제안한다. 이 방법은 태양광 모듈에 반투명 가림막을 설치하여 모듈의 전기적 특성을 인위적으로 변경하며 어레이 전체의 출력 곡선을 측정하고 상호 비교한다. 방법의 효과를 분석하고 제안 방법의 검증을 위해서 회로 시뮬레이션을 실시한다. 또한, 실제 태양전지 어레이에 대해서 본 방법을 적용하고 방법의 타당성을 검증한다. Solar cell modules are connected in serial and parallel in a photovoltaic system. All the solar cell modules degrade over time, and the most degraded module in an array decides the output level of the array. In this study, we suggest a health-monitoring method that makes it possible to detect the most degraded module in an array without separating the module from the array. We suggest placing a nontransparent film on a module in an array to create an artificial shading effect. It needs to monitor the current-voltage curve of the string while placing the film on the next one. We show analytically that the most degraded module can be detected by comparing all the array current-voltage curves. We demonstrated the method using an outdoor photovoltaic array.
한창운(Changwoon Han),박노창(Nohchang Park),오철민(Chulmin Oh),홍원식(Wonsik Hong),송병석(Byeongsuk Song) 대한기계학회 2009 대한기계학회 춘추학술대회 Vol.2009 No.5
Heat sink system for a main board in a network computer is built on printed circuit board by an anchor structure, mounted by eutectic SnPb solder. Constant high temperature condition in the computer keeps solder creeping and makes it failed eventually. To calculate the stress and predict the life of soldered anchor in the station, FE model is used. In the model, Anand constitutive equation is employed to simulate creep characteristics of solder. Creep tests are conducted to verify and calibrate the solder model. A special jig is designed to mitigate the flexure of printed circuit board and to get the creep deformation of solder only in the test. Test results are compared with analysis and calibration is conducted on Anand model's constants. Calibrated Anand model represents the creep characteristics of SnPb solder accurately and, as a result, can perform life prediction of the solder precisely in creep condition.