http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Poly ( butyl acrylate ) / PMMA Core - shell 입자의 합성과 Impact - modifier 로서의 응용
한승,김주영,문탁진,서경도,최형기,강창균 ( Seung Han,Ju Young Kim,Tak Jin Mun,Kyung Do Suh,Hyeong Ki Choi,Chang Kyun Kang ) 한국공업화학회 1995 공업화학 Vol.6 No.1
유리전이 온도가 낮은 고무상 중합체인 폴리부틸아크릴레이트(이하 PBA)를 core로 하고 폴리메틸메타아크릴레이트(이하 PMMA)를 shell로 하는 core-shell 복합입자를 중합하고 이를 PMMA와 블렌드하여 복합입자의 가교도와 입자크기에 따른 블렌드의 물성 변화를 관찰하였다. core인 PBA와 shell인 PMMA의 가교도가 증가함에 따라서 블렌드의 내충격성과 투명성은 향상되었다. 또한, anionic comonomer인 sodium styrene sulfate를 사용하여 합성한 복합입자를 블렌드한 경우에는 composite 입자의 입자크기가 감소함에 따라 블렌드의 내충격성과 투명성은 증가하였다. 따라서, 복합입자의 크기가 감소하고 입자크기가 작고 균일한 복합입자일수록 블렌드에 의한 물성 향상의 정도는 커진다는 것을 알 수 있었다. Polybutylacrylate(PBA)/Polymethylmethacrylate(PMMA) core-shell composite particle was prepared by consecutive emulsion polymerization process and blended with PMMA in order to investigate the effect of particle size and its degree of crosslinking density on the property of PMMA-composite particle blend. The impact resistance and transparency of blend were improved with increasing the degree of crosslinking of PBA and PMMA. In case that PMMA was blended with the composite particle prepared by using sodium styrene sulfate as a reactive emulsifier, the impact resistance and transparency of blend was increased with decreasing particle size of the composite particle. It is thought that this effect results from the improved dispersity and the small and homogeneous domain size formed on PMMA matrix.
PMMA 와 Poly ( butadiene - g - MMA ) 블렌드의 상용성에 관한 연구
박성익,한승,서경도,문탁진 ( Sung Ick Park,Seung Han,Kyung Do Suh,Tak Jin Mun ) 한국공업화학회 1994 공업화학 Vol.5 No.1
PMMA와 본질적으로 비상용성인 PB에 MMA를 그라프트 중합시켜서 이를 PMMA와 블렌드하여 그라프트율 변화에 따른 내충격성, 인장강도, haze 변화 및 상용성변화를 SEM, DSC, Instrone등을 통하여 관찰하였다. Poly(buta-diene-g-MMA)의 그라프트율이 증가함에 따라서, MMA 그라프트로 인한 PMMA와의 상용성의 증가에 의하여 PMMA-poly(butadiene-g-MMA) 블렌드의 인장강도, 내충격성 및 투명성 등이 그라프트하지 않은 PB-PMMA 블렌드에 비하여 향상되는 결과를 나타내었다. 반면에, 투명성은 PMMA 단독수지에 비해서는 다소 떨어지는 결과를 나타내었다. Poly(butadiene-g-MMA) was synthesized by grafting methyl metharcylate on polybutadiene which is intrinsically incompatible with poly(methy methacrylate) (PMMA) and this graft copolymer was blended with PMMA. Mechanical properties of PMMA-poly(butadiene-g-MMA) blends and PMMA-polybutadiene blends, such as impact strength, tensile strength and haze were determined. Morphological changes of the blends as a function of graft percentage were observed by scanning electron microscopy. Mechanical properties of PMMA-poly(butadiene-g-MMA) blends were better than PMMA-polybutadiene blends. Especially, mechanical properties of PMMA-poly (butadiene-g-MMA)blends were improved with increasing graft percentage of MMA.