http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
실크 피브로인 나노 차폐막(나노가이드-에스)을 이용한 치조골 유도재생능력에 관한 비교 연구
한대현,홍기석,정진형,임성빈,Han, Dae-Hyun,Hong, Ki-Seok,Chung, Chin-Hyung,Yim, Sung-Bin 대한치주과학회 2008 Journal of Periodontal & Implant Science Vol.38 No.3
Purpose: To evaluate the safety and efficiency of bone regenerative abilities of silk fibroin nanomembrane(Nanoguide-S) Material and Methods: The objects were 38 patients who had large defect at extraction sockets caused by chronic periodontitis and silk fibroin nano matrix were used on experimental group(N=19) and PLA/PLGA matrix were used on control group(N=19). The width, height, and length by crown-apical direction(socket depth) of defects were measured with the occlusal plane as a reference plane, and tooth axis direction, perpendicular to tooth axis direction were measured on radiographs at 3 months pre-operative, 3 months post-operative. Result: Tissue response to silk fibroin nano matrix and Biomesh were clinically satisfactory and complications such as swelling, exudation, ulceration and vesicles were not found except the ordinary discomfort of operated portion. 3 months later, the width, height, and length by crown-apical direction (socket depth) of defects were clinically improved in both groups with no significant difference. 3 months later radiolucency of tooth axis direction and perpendicular to tooth axis direction were all increased in both groups with no significant difference. Conclusion: By these results biodegradadable silk fibroin nano matrix was efficient in GBR on alveolar bone resorption caused by periodontitis compared to Biomesh.
한대현,Han, Dae-Hyun 한국정보통신학회 2011 한국정보통신학회논문지 Vol.15 No.2
방향성 결합기는 RF 및 마이크로파 대역에서 신호를 분배하거나 감시하는 데 이용된다. 본 논문에서는 마이크로스트립 선로로 구현한 결합선로를 이용한 새로운 구조의 브랜치 선로 방향성 결합기를 제안하였다. 브랜치 선로 방향성 결합기는 결합도가 낮아지면 병렬로 연결된 선로의 특성 임피던스가 높아서 마이크로스트립 선로로 구현하기 어려워진다. 이를 극복하기 위하여 단락된 평형 결합 선로를 이용하여 높은 특성 임피던스를 구현하였다. 제안한 브랜치 선로 방향성 결합기의 시뮬레이션 결과 및 제작하여 측정한 결과를 보였다. 제작한 10 dB 브랜치 선로 방향성 결합기는 10% 대역폭에서 반사 손실이 30 dB 이상, 8% 대역폭에서 고립도 35 dB 이상인 결과를 보였다. Directional couplers are widely used in RF and microwave applications to distribute or monitor signals. This paper presented a new structure of microstrip branch line directional coupler with coupled lines. The loose couplings of microstrip branch line directional couplers are impractical for the high characteristic impedance values required for the shunt branches. To overcome this limitation, the parallel coupled lines with the shorts were used for the high characteristic impedance. The results of the simulations and measurements were presented for the proposed branch line directional coupler. Measurement of the 10 dB branch line directional coupler shows that the return loss is higher than 30 dB over 10 % bandwidth and the isolation is 35 dB or better over 8 % bandwidth.
한대현 ( Dae Hyun Han ),박승복 ( Seung Bok Park ),강래형 ( Lae Hyong Kang ) 한국복합재료학회 2014 Composites research Vol.27 No.4
본 연구에서는 분극 전계에 따른 압전 페인트 센서의 특성을 확인하기 위해 충격힘과 분극 전계를 변화시켜 가면서 실험적인 연구를 수행하였다. 페인트 센서 제작을 위해 유연 압전 재료인 Pb(Ni1/3Nb2/3)O3-Pb(Zr, Ti)O2 (PNN-PZT) 파우더와 경화제를 포함하고 있는 에폭시 수지를 중량비 1:1로 혼합 후 몰드를 사용하여 40 × 10 × 1 mm3 크기를 같는 시편을 제작 하였다. 이후 시편의 기공을 제거하기 위해 진공 데시케이터를 사용하였다. 분극 작업을 위해 시편의 전극은 실버페이스트를 윗면과 아랫면에 바르고 하루 동안 건조시켜 제작하였다. 분극 작업은 온도는 상온으로, 분극 시간은 30분으로 고정하고 분극 전계를 달리하여 진행되었다. 1 mm의 두께를 갖는 앞전 페인트센서를 제작하여 실험에 사용하였으며, 감도 측정 및 감도 변화는 충격 망치를 사용하여 시편에 충격을 가했을 때 압전 페인트에서 출력되는 전압과 충격 망치에서 출력되는 전압을 측정 후 신호처리 하여 비교하였다. 그 결과 압전 페인트의 민감도에 분극 전계가 미치는 영향에 대해 평가 하였고 그 결과를 기술하였다. In this study, the experimental study has been performed by varying the polarization of the electric field and impact force to check the piezoelectric characteristics of piezoelectric paint sensor. Piezoelectric paint sensor used in this study is composed of epoxy resin with a hardener and PNN-PZT powder in 1:1 weight ratio. The dimensions of the paint sensor specimen are 40 × 40 × 1 mm3 and regular specimens were made using a mold. The voids are removed from the specimen in the vacuum desiccator. Both upper side and bottom side of the paint sensor were coated with silver paste for making an electrode and then dried at room temperature for a day. The poling treatment has been carried out under controlled conditions of the electric field in order to check the effect of piezoelectric sensitivities, while the poling temperature was fixed at room temperature and the poling time was set to 30 min. The piezoelectric sensitivities have been measured by comparing output voltage from paint sensor with output force from impact hammer when the impact hammer hits the paint sensor. In result, the effect of the electric field has been evaluated for the sensitivity and describe the result.
한대현,Han, Dae-Hyun 한국정보통신학회 2018 한국정보통신학회논문지 Vol.22 No.7
공동공진기는 마이크로파 응용에서 많이 사용되는 부품 중의 하나이다. 무부하 Q, 공진주파수, 그리고 결합계수는 공진기 기본 파라미터이다. 손실결합이 있는 공동공진기의 무부하 Q를 측정하는 간편한 절차를 제안하였다. 공진주파수 근처 주파수 대역에서 결합손실을 포함한 등가회로를 보였으며, 결합손실은 공진기의 임피던스를 측정하여 구했다. 결합손실을 보상한 공진기의 임피던스를 스미스차트에 다시 그렸다. 보상한 임피던스 궤적에서 부하 Q와 결합계수를 구하여 무부하 Q를 계산하였다. 제안한 절차를 검증하기 위하여 결합 손실이 없는 공진기를 측정하였다. 결합 손실이 있는 경우와 손실이 없는 경우의 측정결과는 잘 일치 하였다. 측정된 결과는 제안한 절차가 유용함을 확인하였다. The cavity resonator is one of the widely used components in the microwave applications. The unloaded Q, the resonant frequency, and the coupling factor are basic parameters of a cavity. A simple unloaded Q factor measurement procedure of a cavity is proposed in a lossy coupling. The equivalent circuit of a cavity with coupling loss at near the resonant frequency is presented. The coupling loss resistance was found by the measurement of a cavity impedance. The cavity impedance compensated coupling loss was redrawn on the Smith Chart. The loaded Q and coupling factor were obtained based on the compensated impedance locus and then the unloaded Q factor was calculated. To verify the proposed procedure, the cavity with lossless coupling was measured. The two measurement results in the lossy and lossless coupling agree well. The results confirm the proposed procedure is valid.