http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이방향 휨응력상태의 콘크리트 강도 특성, 크기효과 및 피로거동에 관한 실험적 연구
지광습,김지환,Zi, Goangseup,Kim, Jihwan 대한토목학회 2013 대한토목학회논문집 Vol.33 No.3
본 논문에서는 이방향 응력상태에서의 콘크리트 강도 특성과 크기효과 그리고 피로거동에 관한 연구를 수행하였다. 이를 위해 ASTM C 1550 시험법과 이방향 휨강도 시험(biaxial flexure test; BFT)을 적용하여 크기효과 및 피로시험을 실시하였으며, 단순보의 3등분점 하중에 의한 콘크리트 휨강도 시험(third-point bending test) 결과와 비교하였다. 실험 결과 3등분점 재하 휨강도 시험에 의한 일방향 응력상태의 강도보다는 ASTM C 1550 시험법과 이방향 휨강도 시험법에 의한 이방향 응력상태의 강도가 더 큰 것으로 측정되었다. 3등분점 재하 휨강도 시험, ASTM C 1550, 이방향 휨강도 시험법 모두 시편의 크기가 증가함에 따라 강도는 감소하는 것으로 관찰되었으며, 이방향 휨인장강도의 크기 효과가 일방향 휨인장강도의 크기효과보다 더 큰 것으로 확인되었다. S-N 곡선에 의한 일방향과 이방향 휨강도의 피로 수명은 유사한 것으로 분석되었다. In this study, flexural strength properties of concrete under biaxial stress state were experimentally investigated. Tests for size effect and fatigue behaviour of concrete under biaxial stress were carried out by the ASTM C 1550 and the biaxial flexure test(BFT). The results given by the biaxial tests were compared to those by the third-point bending test. Test results showed that biaxial flexural strengths obtained from the ASTM C 1550 and the biaxial flexure test are greater than the strength by the third-point bending test. As the size increases, the uniaxial and biaxial flexural strength decreases. However, the slope of the size effect of the biaxial strength was greater than that of the uniaxial strength. Finally, the fatigue response of concrete under the biaxial stress state was similar with that for uniaxial stress state.
지광습,문상모,이인모,Zi, Goangseup,Moon, Sang-Mo,Lee, In-Mo 한국터널지하공간학회 2006 터널기술 Vol.8 No.2
본 연구에서는 화강암의 3차원 거동을 예측 분석할 수 있는 구성방정식을 마이크로플레인 모델을 이용하여 Westerly 화강암과 Bonnet 화강암의 시험데이터와 최적을 이루도록 개발하였다. 개발된 마이크로플레인 모델은 화강암의 일축압축 및 삼축압축 거동을 잘 예측하였다. 그리고 개발된 화강암의 마이크로플레인 모델을 유한요소법에 적용하여 암반 굴착시의 발파 모사를 통해 화강암의 비선형 거동을 효과적으로 해석하였다. 발파 응력파의 감쇠계수, 파쇄 영역 그리고 여굴을 방지할 수 있는 화약 장전조건 등이 연구되었다. 마이크로플레인 모델에서는 암석의 비선형 거동 및 균열발생으로 인한 에너지 감소가 잘 반영되었으며 발파 응력파의 감쇠계수는 선형탄성모델보다 크게 계산되었다. 또한 마이크로플레인 모델에서는 발파 응력파 진행에 따른 최대 주변형율을 이용하여 파쇄 영역을 직접적으로 계산할 수 있었다. A kinematically constrained microplane constitutive model is developed for intact granite. The model is verified by fitting the experimented data of Westerly granite and Bonnet granite. Using the model with the standard finite element method, the behavior of the intact granite subjected blasting impact is studied. What is studied includes the attenuation of the blasting waves, the size of the fractured zone and the effect of the charge condition to avoid overbreak of the rock mass. The model developed captures the energy loss due to the inelastic behavior and the microcracking of granite during blasting very well. The attenuation of the blasting waves calculated based on the model is much more than that based on the linear-elastic constitutive law. The size of damaged (or fractured) zone is calculated directly from the principal strain as blasting impact is spreading, not like in the case with the linear elasticity model.
지광습(Zi Goangseup),유성문(Yu Sungmun),챠우딘딴(Chau-Dinh Thanh),문성호(Mun Sungho) 대한토목학회 2010 대한토목학회논문집 D Vol.30 No.4D
본 논문에서는 아스팔트 포장의 균열 성장을 분석하기 위해서 확장유한요소법을 사용하였다. 또한 아스팔트의 점탄성 효과를 고려하기 위하여 맥스웰 체인을 이용한 점탄성 구성방정식을 사용하였으며, 균열 모델로는 선형점성균열 모델을 사용하였다. 특히 접탄성 구성방정식을 구성할 때 측정을 통해 얻어지는 온도별 변형계수와 지연시간을 Prony 급수를 이용해 재구성 한 크리프 곡선을 직접 사용하지 않고 연속적인 미분이 가능한 멱승 로그 식으로 대체하여 사용하였다. 역승 로그 식으로 완화시간 스펙트럼(relaxation spectrum)을 계산하여 맥스웰 체인의 부분탄성계수(partial moduli)를 도출하였다. 멱승 로그 적정 식을 통해 구한 맥스웰 체인의 부분 탄성계수는 크리프 곡선을 직접 이용하는 방법으로 구한 부분 탄성계수 보다 안정적인 형태의 곡선을 나타내어 해석을 용이하게 해준다. 개발된 정적균열 해석 모듈을 이용하여 아스팔트 시편의 온도별 정적균열 성장 실험 결과를 성공적으로 모사할 수 있었다. This paper studies static crack growth of asphalt pavement using the extended finite element method (XFEM). To consider nonlinear characteristics of asphalt concrete, a viscoelastic constitutive equation using the Maxwell chain is used. And a linear cohesive crack model is used to regularize the crack. Instead of constructing the viscoelastic constitutive law from the Prony approximation of compliance and retardation time measured experimentally, we use a smooth log-power function which optimally fits experimental data and is infinitely differentiable. The partial moduli of the Maxwell chain from the log-power function make analysis easy because they change more smoothly in a more stable way than the ordinary method such as the least square method. Using the developed method, we can simulates the static crack growth test results satisfactorily.