http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
CMOS 전류 컨베이어를 이용한 높은 Q의 시뮬레이티드 인덕터 설계
정원섭 청주대학교 2016 産業科學硏究 Vol.33 No.2
A high-Q simulated inductor is realized using CMOS current conveyers, which have improved high frequency characteristics. The current conveyer have five terminals: a voltage input terminal Y, a current input terminal Xi, a voltage output terminal Xv, and two current output terminals Z+, Z-. The conveyer is composed of two unit-gain buffers and six current mirrors. These conveyers are used for implementing the simulated inductor. For verifying the applicability of the simulated inductor, second-order band-pass filter is designed and simulated using Cadence tool with 0.18 μm TSMC process.
전자인증제도 정착을 위한 연구 : 전자서명법 및 시행령 제정과정상의 정책이슈를 중심으로
鄭元燮 水原大學校 社會科學硏究所 1999 社會科學論集 Vol.11 No.-
정보화사회의 진전에 따른 전자문서 및 전자상거래의 급증은 전자문서 및 거래의 안전성 및 신뢰성 확보의 전제조건이 되는 저자서명의 법적 효력 및 공인 인증기관의 역할 및 책임 등에 관한 명확한 법적 규제의 필요성이 제기되고 있다. 이러한 법적 규제를 마련하는 과정에서 관련 이해집단 및 기관으로부터 공인 인증기관의 허가 기준 및 절차, 공인인증기관의 순해배상책임 및 범위, 공공CA 허용문제 및 공공부문에 의한 선도적 인증 수요 창출 문제, 적정 공인인증기관의 수, 정부규제의 범위에 관한 문제, 공인인증기관 허가관청 문제 및 개인정보 보호문제 등의 다양한 이슈도 동시에 제기되고 있다. 전자문서 및 전자상거래의 안전성 및 신뢰성 제고를 통한 국민생활의 편익을 도모하고 나아가 국가 경쟁력을 강화하기 위하여 제정된 전자서명법의 입법 목적을 효과적으로 달성하기 위해서는 합리적 공공부문 인증체계 구축; 전자서명법과 전자거래기본법의 일원화; 시행령으로 위임된 사항에 대한 세부적 지침의 작성; 개인정보보호 및 통일된 국제적 전자인증제도에 대한 대응 등과 같은 향후 정책과제에 대한 보다 심도 깊은 연구가 필요하다고 판단된다.
A Design of LC-tuned Sinusoidal VCOs Using OTA-C Active Inductors
정원섭,손상희 한국전기전자학회 2007 전기전자학회논문지 Vol.11 No.3
Sinusoidal voltage-controlled oscillators (VCOs) based on Colpitts and Hartley oscillators are presented. They consist of a LC parallel-tuned circuit connected in a negative-feedback loop with an OTA-R amplifier and two diode limiters, where the inductor is simulated one realized with temperature-stable linear operational transconductance amplifiers (OTAs) and a grounded capacitor. Prototype VCOs are built with discrete components. The Colpitts VCO exhibits less than 1% nonlinearity in its current-to-frequency transfer characteristic from 4.2 to 21.7 MHz and 95 ppm/ temperature drift of frequency over 0 to . The total harmonic distortion (THD) is as low as 2.92% with a peak-to-peak amplitude of 0.7 V for a frequency-tuning range of 10.8-32 MHz. The Hartley VCO has the temperature drift and THD of two times higher than those of the Colpitts VCO.
저전압 고선형 바이폴라 OTA와 이를 이용한IF 대역통과 필터
정원섭,손상희 대한전자공학회 2007 電子工學會論文誌-SD (Semiconductor and devices) Vol.44 No.7
A low-voltage high-linear bipolar OTA and its application to IF bandpass filter for GSM cellular telephone are presented. The OTA consists of a low-voltage linear transconductor, a translinear current gain cell, and three current mirrors. The bandpass filter is composed of two cascaded identical second-order bandpass filters, which consist of a resistor, a capacitor, and a grounded simulated inductor realized with two OTA's and a grounded capacitor. SPICE simulations using an 8 GHz bipolar transistor-array parameter show that the OTA with a transconductance of 1 mS exhibits a linearity error of less than ±2% over an input voltage range of ±0.65 V at supply voltages of ±2.0 V. Temperature coefficient of the transconductance is less than -90 ppm/°C. The bandpass filter has a center frequency of 85 MHz and -factor of 80. Temperature coefficient of the center frequency is less than -182 ppm/°C. The power dissipation of the filter is 128 mW. GSM 셀룰러폰을 위한 저전압 고선형 바이폴라 OTA와 이릉 이용한 IF bandpass filter(BPF)를 제안하였다. OTA는 저전압 선형 transconductor, translinear 전류이득 셀, 그리고 3개의 전류 미러로 구성 되어있다. BPF는 2개의 동일한 2차 BPF를 직렬 연결한 형태인데, 2차 BPF는 저항과 커패시터 그리고 2개의 OTA와 커패시터로 된 ground simulated inductor로 구성되어있다. 8GHz bipolar transistor-array를 사용한 SPICE 시뮬레이션에서는 1mS의 transconductance의 OTA가 ±2% 이하의 선형오차와 ±2 V에서 ±0.65 V이상의 선형범위를 가짐을 보여준다. transconductor의 온도계수는 -90ppm/°C이하이다. BPF는 중심주파수는 85MHz Q값은 80이 되도록 설계하였다. 중심주파수에서의 온도계수는 -182ppm/°C이고, BPF의 소비전력은 128mW이다.
정원섭,주상훈,강흥원,최낙준 대한금속재료학회(대한금속학회) 1998 대한금속·재료학회지 Vol.36 No.1
In order to investigate the effect of particle shape on the gaseous reduction rate of iron ore, iron oxide pellets of different shape were reduced with CO-CO₂ gas mixture. A reduction model for a non-spherical particle was proposed. Applicability of the proposed model was examined by comparing the analysis results from this model and one of the existing models for non-spherical particle. According to the result of applicability comparison, the fractional reduction calculated by the former model were on the better agreement of the observed ones than by the latter model. Investigation revealed that the assumption of the proposed model was reasonable and practicable.
정원섭,민동준,윤수종 ( Won Sub Chung,Dong Jun Min,Su Jong Yoon ) 한국주조공학회 1995 한국주조공학회지 Vol.15 No.5
N/A A computer simulation model of various smelting process for melting waste sand was developed by using energy and material balance concept. This model can predict the coal, flux and oxygen consumption and the volume and temperature of off-gas. The major critical variables for smelting process can be explained by using the analysis of energy and material balance. The major conclusions were as follows; 1. The most important variables for smelting process were high post-combustion ratio, high heat transfer efficiency and refractory protection technology. 2. For saving energy in this smelting process, selection of raw materials i.e coal, flux are very important, espacially using of low volatile coal is very profitable. 3. The treatment cost of waste sand is high and environmental restriction is severe, in this reason we must be concerned in the treatment of waste sand by smelting process.