http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
폐쇄된 계의 닫힌 회전 운동에 대한 컴퓨터 씨뮬레이션 모델에 관한 연구
정병태,Chung, Byung-Tae 한국컴퓨터산업학회 2007 컴퓨터産業敎育學會論文誌 Vol.8 No.3
폐쇄된 계 내부와 외부에서 작용되는 운동에는 선형 열린 운동과 닫힌 운동이 있고 비선형 열린 운동과 닫힌 운동이 있다. 선형 닫힌 운동이 마찰과 같은 외력을 받을시 갇힌 운동이 발생된다. 회전 닫힌 운동에도 마찰과 같은 외력을 받을시 회전 갇힌 운동이 있음을 해석 한다. 회전 닫힌 운동과 갇힌 운동을 액체 실험 장치를 통하여 정량적으로 고찰하고 회전 갇힌 운동이 있음을 분석하여 회전 열린 운동, 닫힌 운동 과 갇힌 운동에 대한 컴퓨터 씨뮬레이션 수식모델을 정한다. 그리고 간단한 운동 장치의 그래픽 구조를 고려 할 수 있도록 소개한다. The movement in the closed system's internal and external, consists of linear open motion and linear closed motion, as well as non-linear motion and non-linear closed motion. When the linear closed motion receives external forces such as friction, closed motion is activated. It explains that even closed rotating systems that are subjected to external forces such as friction becomes a confined rotating system. Through fluid experiments the closed rotating system and confined system's quantitative data was observed and closed rotating system was confirmed to formulate the computer simulation function model concerning closed motion and confined motion. A basic graphic configuration of the motion device is also introduced.
기타음향 입력 장치 및 분석용 Data Base 구성에 관한 연구
정병태 한국컴퓨터산업학회 2002 컴퓨터産業敎育學會論文誌 Vol.3 No.8
Characteristics of a guitar sound changes according to the internal structure a guitar. The developed system uses a PC to analyze a guitar sound, which will have different characteristics in accordance with the internal structure of the guitar and the material that the guitar made, and make a data base. The developed system consist of three parts; a mechanical body which holds a guitar and the internal structure of the guitar can be changed easily; DSP sound acquisition boards which have multi channel sound input and A/D converting abilities with RS232C data transfer to PC abilities; and software which runs on a PC to analyze the input sound and make a data base. 기타는 내부 구조와 재질에 따라, 기타 음의 특성이 달라진다. 개발된 장치는 기타 내부 구조와 재질의 변동에 따른 기타 음의 분석을 컴퓨터로 처리하여 data base화 할 수 있도록 한 장치이다. 시스템의 구성은, 기타 내부 구조를 쉽게 변경할 수 있도록 한 기구부와, 다 채널의 음향 입력을 A/D 변환하여 DSP 보드에서 처리 한 후 RS232C를 통하여 PC 에 입력하는 방법으로 음량를 수집할 수 있는 입력 장치부와, 입력된 데이터를 컴퓨터에서 data base화 하여 쉽게 조회 및 분석 할 수 있도록 하는 소프트웨어로 구성되어 있다.
자성물질을 가속시키기 위한 전류 Segment 코일의 설계
정병태,Chung, Byung-Tae 한국전자통신학회 2012 한국전자통신학회 논문지 Vol.7 No.4
현재까지 코일을 이용한 자성물질 가속에 코일과 자성물질간의 최적한 거리를 명시한 적이 없다. 전류세그먼트 코일구조와 그 다단계를 이용하여 자성물질을 가속 시 통상 코일과 자성 물질이 가깝게만 있으면 최적한 것으로 알고 있으나 미분법으로 극대점을 찾은 결과 코일간의 거리에 대한 절반위치에 있을 때 최적한 거리임을 알 수 있다. 여러 개의 상하 전류세그먼트 코일구조를 만들어 전류세그먼트 코일구조가 자성물질인 강구를 최적한 거리에서 가속할 수 있는지 확인하였다. 강구의 질량에 대한 코일 최소 전류를 실험으로 알았고 그 결과 코일 건이나 자성물질, 자성유체에 적용 시 코일과 물질 간에 최적 거리를 해결 하였다. The distance optimizing between coil and magnetic materials never be specified in the magnetic materials acceleration using the coil till now. We can know to be the distance which optimizes when being in the half position about the distance of intercoil by the result of the max point on the Differential calculus. Whether several top and bottom current segment coil structures were made and the steel ball in which the current segment coil structure is the magnetic materials could be accelerated in the optimizing distance or not confirmed. When the coil valley current about the mass of the steel ball was known as the experiment and it was but to be the nose consequently it applied to the magnetic materials and magnetic fluid, the optimal distance was solved between the coil and material.
분리된 차폐코일을 이용한 센서 없는 BLDC 강구의 가속 장치 개발
정병태 한국지식정보기술학회 2011 한국지식정보기술학회 논문지 Vol.6 No.2
The structure of separated shielding coil(SSC) is analyze and it goes, the magnetic field of the center cause is calculated and the result is confirmed through the simple experiment. In case of considering the materials for shielding of the separated shielding coil as the iron sheet it compares with the case which is not shielded and it measures actually and the shielding factor is found and we define to the numerical formula. It is the object that it is seen like the brush less direct current (BLDC) pulse there is no sensor using SSC and without the brush that acceleration control of the ferromagnetic ball is possible.