http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
781MHz 대역에서 안테나 상관도를 고려한 개선된 MIMO 채널 특성 분석 방법
정명원,정영준,백정기 한국인터넷방송통신학회 2013 한국인터넷방송통신학회 논문지 Vol.13 No.3
본 논문은 781MHz 대역에서 안테나 상관도를 고려한 MIMO 채널 측정을 통해, 측정 데이터를 분석하고 채널 특성을 도출하였다. 상기 주파수 대역은 DTV 시스템에서 이동통신 주파수로 할당이 예정된 대역이다. 781MHz 주파수 대역은 900MHz 이동통신 시스템의 채널특성이 일정부분 유사하지만, 상당히 다른 부분이 있음을 기존 연구를 통해 증명하였다. 또한, 안테나의 상관도를 고려할 경우 신호전달 과정에 대한 보다 정확한 예측을 위해서는 채널특성 연구가 필요하다. 기존 DTV 방송과 혼신을 피하기 위하여 측정은 제주도 인근 도심지역에서 채널사운더와 4×4 안테나로 채널특성을 측정하였다. 측정된 데이터를 바탕으로 도심지역에서 안테나 상관도를 고려한 채널특성을 도출하였다. In this paper, the measurement data is analyzed and channel characteristics are derived through MIMO Channel measurements at 781MHz considering antenna correlation. 781MHz frequency band currently operates the DTV system, however, it will be allocated new mobile communication frequency band. The channel characteristics at 781MHz seem to be similar existing mobile communication system at 900MHz but quite a different part of the existing research has demonstrated. In addition, the signal procedure of the channel characteristics, considering the correlation of the antenna, for a more accurate prediction research is needed. To avoid interference with Korean DTV broadcasting, we measured channel characteristics in urban areas of Jeju island by channel sounder and 4×4 antenna. Channel characteristics with antenna correlation were derived based on the measured data in the urban area.
정명원,김종훈,이흥렬,이재호,Jung, Myung-Won,Kim, Jong-Hoon,Lee, Heung-Yeol,Lee, Jae-Ho 한국마이크로전자및패키징학회 2010 마이크로전자 및 패키징학회지 Vol.17 No.4
복합전기도금은 도금 중 반응성이 없는 물질을 첨가하여 도금층 내부에 함께 존재하도록 함으로써 이루어진다. 퍼멀로이는 철과 니켈의 합금을 말하는 것으로써 높은 투자율를 나타내기 때문에 산업 여러 분야에 응용된다. 복합도금을 통해 제품의 미세경도를 향상시킬 수 있으며 이는 제품의 수명과 연관된다. 하지만 실리카 나노분말 표면의 수산화기는 표면을 수분에 취약하게 만들고 이는 나노분말의 응집을 발생시켜 균일한 도금층의 형성을 어렵게 하는 요인이 된다. 본 연구에서는 실리카 나노분말의 응집을 줄이기 위하여 첨가제의 변화, 초음파 처리 시간의 변화를 살펴보았다. 초음파 처리시간의 증가시 입자의 분산효과가 좋았고 조성의 변화가 발생하였다. 첨가제에 따라 표면 형상과 공석되는 실리카 나노입자의 함량 차이가 나타났다. 염기성 도금용액에서 sodium lauryl sulfate를 사용하였을 경우 표면이 매끄럽고 공석되는 실리카 나노분말의 양도 높았다. The composite electroplating is accomplished by adding inert materials during the electroplating. Permalloy is the term for Ni-Fe alloy and it is used for industrial applications due to its high magnetic permeability. Microhardness for microdevices is enhanced after composite coating and it increases the life cycle. However, the hydroxyl group on the silica makes their surface susceptible to moisture and it causes the silica nanoparticles to be agglomerated in the aqueous solution. The agglomeration problem causes poor dispersion which eventually interrupts uniform deposition of silica nanoparticles. In this study, the dispersion of silica nanoparticles in the permalloy electroplated layer is reported with variation of additives and sonication time. Longer sonication period guaranteed better silica nanopowder dispersion and sonication period also influenced on composition of deposits. The amount of silica nanopowder codeposition and surface morphologies were influenced with variation of additives. In alkaline bath, smooth surface morphology and relatively high contents of silica nanopowder codeposition were obtained with addition of sodium lauryl sulfate.
저온 소결 조제에 따른 PMN-PZ-PT 후막 세라믹 특성
정명원,전대우,김진호,이영진,Jung, Myungwon,Jeon, Dae-Woo,Kim, Jin-Ho,Lee, Youngjin 한국전기전자재료학회 2016 전기전자재료학회논문지 Vol.29 No.8
Convectional PZT based piezoelectric ceramics have to sinter at high temperature about $1,200^{\circ}C$ for their suitable electrical properties. However, some issues: low temperature sintering piezoelectric ceramic composition and reliable internal electrode, have recently attracted a great deal of interest as a highly efficient multi-layered piezoelectric ceramics. In order to optimize low temperature sintering conditions of thick-film PMN-PZ-PT ceramic, it was investigated sintering and piezoelectric properties according to the change of $LiBiO_2$ contents. Thus, the superior piezoelectric properties were found at the pallet type PMN-PZ-PT optimized with low sintering processing at $925^{\circ}C$ including 7 wt% $LiBiO_2$ sintering aid. Consequentially, we successfully manufactured thick-film PMN-PZ-PT ceramics, which had superior piezoelectric and dielectric properties, with 5 wt% of $LiBiO_2$ sintering aid at temperature of $900^{\circ}C$.