http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이해원,이종호,전형우,안재평,박종구,문환,Lee, Hae-Weon,Lee, Jong-Ho,Jun, Hyung-Woo,Ahn, Jae-Pyoung,Park, Jong-Ku,Moon, Hwan 한국세라믹학회 2000 한국세라믹학회지 Vol.37 No.11
표면 윤활층을 가진 나노 알루미나를 진공중에서 가압성형함으로써 결함발생없이 높은 충전압력을 가할 수 있었으며, 높은 밀도, 미세기공, 좁은 기공경 분포를 가지는 성형체를 제조할 수 있었다. 윤활제의 화학 및 기계적 특성에 의하여 변하는 모세관 현상을 조정함으로써 충전효율을 증대하고 결함발생을 억제할 수 있다. 나노분말의 소결에서도 성형 미세구조의 균일도가 치밀화 거동에 여전히 지배적인 역할을 하였다.
복수의 워터젯 노즐 운용변수에 따른 화강암 천공성능 및 형상 분석
박준식,차현종,홍은수,전형우,오태민,Park, Jun-Sik,Cha, Hyun-Jong,Hong, Eun-Soo,Jun, Hyung-Woo,Oh, Tae-Min 한국터널지하공간학회 2021 한국터널지하공간학회논문집 Vol.23 No.6
워터젯 암반 굴착공법은 물과 연마재만을 사용하는 친환경 및 비접촉식 굴착방법으로 다양한 장점을 가지고 있다. 최근에는 기존 천공 공법의 문제점을 보완하고 분진 방지, 소음 저하 등의 이유로 워터젯 공법의 활용이 증가하고 있다. 워터젯 굴착효율을 증대시키기 위해서는 복수의 노즐을 운용하는 것이 유리하다. 복수의 노즐을 사용할 경우, 노즐 운용방법에 따른 굴착성능과 형상을 분석하는 것이 필수적이다. 본 연구에서는 노즐각, 노즐 간 수평거리, 이격거리를 노즐 운용변수로 정의하고 굴착성능과 형상을 분석하였다. 실험결과, 노즐각과 이격거리가 증가할 때 굴착깊이는 감소하였고 유효 굴착깊이는 증가하는 경향을 보였다. 또한, 실험결과를 바탕으로 노즐 삽입에 필요한 굴착형상 기준을 제안하고 기준에 따른 최적 노즐 운용변수를 도출하였다. 본 연구결과는 향후 암반 천공용 다중 워터젯 노즐 개발 시 유용한 기초연구로 활용될 것으로 기대된다. Waterjets for rocks have various advantages of the non-contact and eco-friendly excavation using only water and abrasive. To overcome the problems (e.g., dust and noise occurrence) of the conventional drilling methods, waterjet excavation methods are broadly used. It is advantageous to operate a couple of nozzles in order to increase the waterjet excavation efficiency. When multiple nozzles are used, it is essential to analyze the excavation performance and shape according to the nozzle operation method. In this study, nozzle angle, horizontal distance between nozzles, and standoff distance were defined as nozzle operating parameters and the excavation performance and shape were analyzed. As a result of the experiment, when the nozzle angle and standoff distance are increased, the excavation depth is decreased and the effective depth tends to be increased. In addition, based on the experimental results, the excavation shape criteria required for nozzle insertion were proposed and optimal nozzle operating parameters were derived according to the criteria. This study result is expected to be used as useful basic research in the future development of multiple waterjet nozzles for rock drilling.
열경화몰딩과 반응소결을 이용한 세라믹스 실형상 제조기술 개발
이해원 ( Hae Weon Lee ),신현익 ( Hyun Ick Shin ),전형우 ( Hyung Woo Jun ),김주선 ( Joo Sun Kim ),이종호 ( Jong Ho Lee ),송휴섭 ( Hue Sup Song ) 대한금속재료학회 ( 구 대한금속학회 ) 2004 재료마당 Vol.17 No.5
본 연구는 세라믹 분말 성형 공정에서 금기시 해 오던 열경화성 수지를 결합제로 사용하여 복잡한 형상을 가지는 대형 세라믹 부품의 제조에 활용될 수 있도록 고분자 기술인 열경화몰딩기술을 세라믹 분말 성형에 성공적으로 접목하였다. 특히, 액상응결 공정에 의하여 다양한 형상과 크기 분포를 가지는 구성분말에 대해서도 균일한 과립을 제조할 수 있을 뿐만 아니라 과립의 분말 충전밀도를 조정할 수 있게 됨으로 인하여 GCM 성형공정에 의해서도 상당히 복잡한 형상의 성형체를 제조할 수 있게 되었다. 열경화성 결합제의 제한된 유동성과 변형능을 활용하여 다공성 세라믹스의 기공구조를 제어할 수 있는 가능성이 매우 크다는 사실을 고체전해질 연료전지 음극 연구를 통하여 확인한 것도 큰 의의가 있다고 하겠다. 이외에도 분말 입자간의 마찰력이 매우 크기 때문에 공학적인 의미를 부여할 수 있는 대형 부품을 성형하기 매우 어려운 나노분말의 성형에도 GM 공정이 상당히 효과적인 것을 확인하였다. 본 연구실에서는 열경화성 결합제를 사용하여 다공 성 기판에서도 결함없는 후막을 형성하는 공정과 다기능성 다공성 세라믹스 부품의 실형상 제조 공정 등에도 열경화 몰딩기술의 원리를 적용하고 응용 범위를 확 대하는 연구개발 노력을 계속하고 있다.
전형우,김주선,박준영,박종구,황순영,이해원 대한금속재료학회 2004 대한금속·재료학회지 Vol.42 No.4
This study investigates the fabrication of WC-12Co feedstock powders with weakly locculated slurries by spray drying under various conditions. The morphological defects and flocculation states according to the amount of additives are evaluated to prepare spherical WC-Co feedstock powders with little morphological defects and homogeneous microstructures. The characteristics of feedstock powders, heat treated between 850-1200℃, are analyzed via SEM, EPMA, and mercury porosimetry. The results showed that with the increase in heat treatment temperature the portion of larger pores around 10 μm increased while, that of smaller pores of 1 μm lessened due to the coalescence of WC particles, forming dense feedstock powders with little defects such as hollow or craters. The feedstock heat treated at 1200℃ showed a porosity of 42.2% and a density of 8.28 g/cm^(3) as well as uniform distribution of pores and Co. (Received January 19, 2004)