http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전라북도 이리지역의 20대 남녀 하악 제1대구치 우식에 관한 연구
이인규,김연수,Lee, In-Kyu,Kim, Yun-Su 대한치과기공학회 1986 대한치과기공학회지 Vol.8 No.1
In order to evaluate the community dental health level the actual health capacity of the lower-first permanent molar is suitable as a indicator for assessment. So we had surveyed decayed, missed and filled lower permanent first molar of 460 persons who were in the age from 20 to 29 in Iri City. The obtained results were as follows: 1. The DMFT indices of the lower first permancent molars showed in 1.40 in the age group of from 20 to 24 and 1.44 from 25 to 29. 2. The actual dental health capscities of the lower first permanent molars showed in 84.86% in the age group of from 20 to 24 and 81.03% from 25 to 29. 3. The DMF indices of the lower first permanent molars showed 15.15% in the age group of from 20 to 24 and 18.98% of from 25 to 29. 4. The DMF rates of the lower first permanent molars showed 85.66% in the age group of from 20 to 24 and 88.70% of from 25 to 29. 5. The DMF rates of the lower first permanent molars showed 70.00% in the age group of from 20 to 24 and 71.96% of from 25 to 29. 6. The DT rates of the lower first permanent molars showed 48.84% in the age group of from 20 to 24 and 39.55% of from 25 to 29. 7. The FT rates the lower first permanent molars showed 40.22% in the age group of from 20 to 24 and 43.98% of from 25 to 29. 8. The MT rates of the lower first permanent molars showed 10.94% in the age group of from 20 to 24 and 16.17% of from 25 to 29.
이인규,Lee, In-Kyu 대한치과기공학회 1983 대한치과기공학회지 Vol.5 No.1
적은 경비로써 보다 양호한 치경부의 적합과 Shade를 얻고 치경부의 변색을 막기 위하여 도재소부용 귀금속과 비금속, 그리고 귀금속과 비금속위에 도금을 하는 4가지 유형으로 나누어 실험하였던 바 다음과 같은 결과를 얻게 되었다. 1. 도재소부용 귀금속으로 치관전체를 주조하는 경우는 수축율이 적고 연성이 뛰어나 경비가 많이 소요된다. 2. 비금속으로 치관전체를 주조하는 경우는 경비는 저렴하나 치경부의 적합성이 금속에 따라 차이가 있으며 그 중 Gemini II가 가장 우수하였다. 3. 비금속으로 치관 전체를 주조하고 10K의 Gold로 도금하는 경우는 적합성에서는 비금속과 동일하나 도금이 고리게 되지 않고 Shade에서도 별 효과가 없었다. 4. 치관의 윗부분은 비금속으로 먼저 주조하여 Degassing한 후 나머지 2mmwjd도의 치경부를 귀금속으로 주조하는 경우는 치경부의 적합성은 귀금속과 동일하게 우수하고 경비 또한 매우 저렴하였다. This study was undertaken to know the difference that margin fittness in metal bond porcelain crown. When we use porcelain precious metal and non-precious metal as porcelain-fused metal, the results were as following. 1. The precious metal was showed best result in margin fittness and shade. 2. The non-precious metals were showed good results, especially Gemini II was excellent, but that was not good than precious metal. 3. 10k. gold plating on non-precious metal cap showed same result as nonprecious metal in margin fittness, and not good in shade. 4. When we use the non-precious metals at upper part of crown, and using precious metal in 2mm cervical portion, the margin fittness were very good, and the results same as full veneer precious metal.
일부도시지역 노인의 건강요구와 노후생활에 대한 의식구조조사
이인규,Lee In Kyu 대한간호협회 1978 대한간호 Vol.17 No.1
This survey was conducted to find out the basic needs of the aged and differences in the idea of old age between average adults and the aged. Analizing the data collected from 220 aged persons living in a part of Weon Ju City in Gang Weon Province during
치관보철물(齒冠補綴物) 제작(製作)에 사용(使用)되는 Nickel-Chromium계(系) 합금(合金)의 치경부(齒頸部) 변록(邊綠)에 관(關)한 적합성(適合性)
이인규,최운재,Lee, In-Kyu,Choi, Un-Jae 대한치과기공학회 1991 대한치과기공학회지 Vol.13 No.1
The purpose of this study was to determine the marginal fit of recasting by used nickel-chromium metal alloys, Hi-Crown, New-Crown and CB-80. Ninety crown prosthetics were divided into eighteen groups according to new to old metal ratios. Each crown was seated on its master die and then the marginal gaps were measured under optical microscope($\times$50). All groups were showed good marginal fit, except group 3 of Hi-Crown(156$\mu$m). The results suggest that the marginal fit of Ni-Cr metal alloy casting bodies were good as without concerned to mixed ratios and metals.
이인규,Lee, In-Gyu 대한에이즈예방협회 2006 레드리본 Vol.71 No.-
HIV에 감염되었다는 것을 아는 것은 모든 사람에게 커다란 충격이다. 그 충격에서 어느 정도 헤어나면 곧 생활의 문제가 닥쳐온다. 완전히 다른 세계에 온 것처럼 어려움을 느끼는 초기 감염인들에게 도움을 주고자 실제 상담에서 많이 나온 가장 급하고 중요한 정보를 중심으로 4차에 걸쳐 싣고 있다.