http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
수소규소화 반응에 의한 실리콘 계면활성제의 합성에 관한 연구
이원업,이주헌,이규환,유복렬 한국공업화학회 2001 한국공업화학회 연구논문 초록집 Vol.2001 No.-
친수성을 갖고 있는 폴리메틸실록산-폴리알킬렌 옥사이드(polymethylsiloxane-polyalkylene oxide)의 공중합체를 제조하기 위한 방법으로 수소규소화 반응을 사용하였으며, 먼저 고분자의 공중합체를 제조하기 위한 기초실험으로서, 단분자들인 디에톡시메틸실란과 알릴아세테이트, 알릴아크릴레이트 등의 불포화 화합물과의 반응성을 조사하였다. 이 실험에서 Kastard촉매 [Pt(CH<sub>2</sub>=CHMe<sub>2</sub>Si)<sub>2</sub>O]를 사용했을 때 Speier촉매 (H<sub>2</sub>PtCl<sub>6</sub>ㆍ nH<sub>2</sub>O)보다 반응효과가 더 컸다. 따라서 폴리메틸실록산-폴리알킬렌 옥사이드(polymethylsiloxane-polyalkylene oxide)의 공중합체 제조에 Kastard 촉매를 사용하였다. Si-H결합을 갖고 있는 폴리메틸실록산을 불포화 고분자물질인 (폴리에틸렌 옥사이드) 디알릴 에테르[(polyethylene oxide)diallyl ether]를 반응시켜 폴리메틸실록산-폴리알킬렌 옥사이드(polymthylsiloxane-polyalkylene oxide) 공중합체를 합성하였다. 결론적으로 친수성을 갖고 있는 폴리메틸실록산-폴리알킬렌 옥사이드(polymethylsiloxane-polyalkylene oxide)의 공중합체를 제조하기 위해서는 Kastard 촉매가 효과적이고, ω-메틸(풀리프로필렌 옥사이드) 알릴 에테르[ω-methyl(polypropylene oxide) allyl ether]가 적합함을 알았다.
전기발광 재료로서 5,7 dichloro-8-quinolinato Europium(III) 킬레이트의 합성 및 특성에 관한 연구
김학진,이원업,이주헌,장주환,윤명희 한국공업화학회 2001 한국공업화학회 연구논문 초록집 Vol.2001 No.-
전기발광을 이용한 소자는 Liquid crystal di splay(LCD)에 비하여 응답속도가 빠르고 휘도가 뛰어나다는 전과 가격 변에서 견줄만하고 가시광선 영역 안에서 효율적인 발광을 하며, 새로운 타입의 평판 Full color 디스플레이에 대한 적용 가능성 때문에 매우 흥미롭다. 따라서 본 연구에서는 란탄족 원소로 유로피움 금속이온과 5,7 dichloro-8-quinolinol 리간드를 가진 배위화합물을 합성하여 NMR, IR 분광법으로 구조와 특성을 확인하고 PL (photoluminescence) 을 고찰하여 전기발광 재료로서 응용가능성을 조사하였다. 합성된 시료는 석영판에 휘발성 용매에 녹인 시료를 spin -coating으로 입혀 용매를 증발시킨 후 필름상태로 준비하여 PL(photoluminescence) 스펙트럼을 측정하였다. UV 흡수 스펙트럼은 378nm에서 보여주었지만 광발광 스펙트럼은 667nm에서 나타났고 발광색은 적색영역이었다. 본 연구에서 합성된 착물은 적색 발광체 전기발광 소재로의 응용이 기대된다.
고기능성 Silicone 실란트의 물성 및 조성의 최적화를 위한 연구
이규환,강혜식,이원업,이주헌 한국공업화학회 2000 응용화학 Vol.4 No.2
For the development of manufacturing process of high-technology silicone sealants, optimization for the basic formulation and physical properties of that high-technology silicone sealants was studied and the curing mechanism was elucidated. Effecting factors to the physical properties for high-technology silicone sealants were base silicone polymer, filler, catalyst, crosslinker and additives, and their effects were investigated. Base silicone polymers were a polydimethylsiloxane with hydroxy substituents on both terminal positions with a viscosity of 1,000-100,000cst. Fumed silica and calcium carbonate were used as a filler for the weight and tensile strength. Catalyst was used less than 10% wt. and several additives were studied for the specific purposes. As a result, the optimized manufacturing process of high-technology silicone sealants was obtained and the application for commercial uses was tested.