http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
공동체 문화 활성화를 위한 APT단지 부대복리시설 계획에 관한 연구
이광영,조진만,Lee, Gwang-Young,Cho, Jin-Man 한국주거학회 2008 한국주거학회 논문집 Vol.19 No.2
This study is researched to provide design guidelines of service facilities and programs that apartment residents want along with the increased quality of life. This study is signifiant because it sought effective methods to activate the com-munity culture through service facilities in apartment complexes and the design standard and planning direction for residents. The study results are as follows. In the result of the correlations analysis and multiple regression analysis for the importancy of service facilities in apartment complexes, the following orders were considered as important factor; man-ager office, open space, resident community facility, elderly people meeting and activity facility, walking paths, resident athletic facility, a children's playground, library, and rest areas in the complex. and result of the correlations analysis and multiple regression analysis is the following: service facilities whole importance (y) = 1.413$+0.262^*{\times}1$ (manager office importance)$+0.271^*{\times}2$ (open space importance) $+0.185^*{\times}3$ (resident community facility importance) $+0.136{\times}4$ (elderly people meeting and activity facility importance)$+0.036^*{\times}5$ (walking paths importance) $+0.031^*{\times}6$ (resident athletic facility importance) + $(-0.042)^*{\times}7$ (a children's playground importance) + $(-0.045)^*{\times}8$ (library importance) + $(-0.0097)^*{\times}9$ (rest areas importance).
소결 전 지르코니아 표면처리와 라이너 사용에 따른 지르코니아와 열가압성형도재의 전단결합강도
이광영,조미향,최성민,Lee, Gwang-Young,Cho, Mi-Hyang,Choi, Sung-Min 대한치과기공학회 2015 대한치과기공학회지 Vol.37 No.3
Purpose: This study was intended to investigate the effect of applying liner for chemical bonding and physical surface roughness created on zirconia by using a sandpaper before sintering on the bond strength between the two materials. Methods: Zirconia blocks were cut using a low-speed cutter. Plate-shaped specimen($6mm{\times}6mm{\times}3mm$) was fabricated by sintering after giving surface roughness according to four kinds of sandpapers. Depending on whether or not to use liner, 60 specimens were divided into two groups ZN(non-liner), ZL(liner), and the two groups were subdivided into four groups respectively in accordance with sandpaper used, totaling eight groups (n=10). The surface roughness (Ra) values and shapes before sintering were observed, and shear bond strength after pressing ceramic plasticity was measured with a universal testing machine. For a test of the significance, a one-way ANOVA was performed, and Tukey's multiple comparison test was conducted. Results: The observation of the surface roughness was SB04($2.22{\pm}1.16{\mu}m$), SB08($2.98{\pm}0.33{\mu}m$), SB12($2.44{\pm}1.32{\mu}m$), SB20($2.34{\pm}0.59{\mu}m$) and SA04($2.34{\pm}0.67{\mu}m$), SA08($1.28{\pm}0.90{\mu}m$), SA12($2.03{\pm}1.60{\mu}m$), SA20($2.19{\pm}1.73{\mu}m$). In the case of ZN Group, the shear bond strength was ZN04($23.26{\pm}3.83MPa$), ZN08($21.76{\pm}2.33MPa$), ZN12($20.49{\pm}3.01MPa$), ZN20($24.98{\pm}4.22MPa$)(p<0.05). As for ZL Group, the shear bond strength was ZL04($25.09{\pm}5.67MPa$), ZL08($22.98{\pm}2.26MPa$), ZL12($21.54{\pm}5.70MPa$), ZL20($23.98{\pm}3.23MPa$)(p<0.05). Conclusion: The research results showed that the bond strength of Zirconia core and Pressing ceramic was further improved by physical surface treatment before sintering, rather than by chemical bonding through liner surface treatment.
지르코니아 코어와 전장용 세라믹의 결합 강도에 대한 표면 처리 방법 평가
이광영,홍민호,Lee, Gwang-Young,Hong, Min-Ho 대한치과기공학회 2020 대한치과기공학회지 Vol.42 No.3
Purpose: This study aimed to identify the impact of physical surface roughing with a polishing tool onto the pre-sintering yttria-stabilized tetragonal zirconia polycrystals (TZP) core and liner treatment for chemical bonding on the bond strength of TZP core and veneering ceramic. Methods: Overall, 80 specimens were classified into two groups (non-liner, NL; and usingliner, UL ) depending on the use of liner, and these two groups were then subclassified into four groups depending on the polishing tool used. (1) Non-liner groups: NS, non-liner+stone point; NC, non-liner+carbide bur; NP, non-liner+paper cone point; NT, non-liner+silicon point. (2) Using-liner groups: US, using-liner+stone point; UC, using-liner+carbide bur; UP, usingliner+paper cone point; UT, using-liner+silicon point. The pre-sintering surface roughing values and shapes were observed, and after burning up the veneering ceramic, the shear bond strength was measured using a universal testing machine. For significance testing, a one-way analysis of variance and Tukey's multiple comparison test were conducted. An optical microscope was used to observe the fracture plane, and the following results were obtained. Results: Surface roughness NP (4.09±0.51 ㎛) represented a higher value than other groups (p<0.001). In shear bond strength, NS (35.21±1.44 MPa) of the NL group showed the highest bond strength (p<0.001). The UL group did not show a statistically significant difference between groups (p=0.612). Conclusion: Our study findings reveal that the bond strength of TZP core and veneering ceramic was improved by pre-sintering physical surface treatment than by chemical bonding with liner surface treatment.
치과용 지르코니아 표면처리방법에 따른 지르코니아와 전장용 도재의 결합강도 관찰
이광영,최성민,Lee, Gwang-Young,Choi, Sung-Min 대한치과기공학회 2019 대한치과기공학회지 Vol.41 No.4
Purpose: The dental CAD / CAM system has been popular with the development of the digital dental industry. Zirconia is a typical material in dental CAD / CAM systems. Zirconia crowns are classified into single layer and double layer. This study is about the double layer crown of zirconia. The surface roughness, bond strength and fracture patterns of the zirconia surface were observed. Methods: Zirconia blocks were cut using a low speed cutter. Sintered to form a plate shape (6mm × 6mm × 3mm). The prepared specimens were surface treated in four ways. Surface roughness and bond strength were measured. And the fracture pattern was observed. Results: Result of surface treatment of zirconia. The surface roughness test results were as ET 2.87 ㎛, ST 2.67 ㎛, LT 2.44 ㎛, AT 2.41 ㎛, CN 2.08 ㎛ order. Bond Strength results were as LT 25.09 MPa, AT 23.27 MPa, ST 21.27 MPa, ET 21.09 MPa, CN 16.12 MPa order. Fracture patterns showed cohesive failure of 25-50% of the bond area. Conclusion: Surface roughness, bond strength and fracture pattern of the zirconia surface were observed. Etching the surface treatment of zirconia materials has been shown to affect the surface roughness. Zirconia special binder treatment has been shown to affect the bond strength improvement.
층간분리 효과를 고려한 복합재 핀의 비선형 천음속 플러터 해석
이광영(Gwang Young Lee),김기하(Ki-Ha Kim),김동현(Dong-Hyun Kim) 항공우주시스템공학회 2023 항공우주시스템공학회지 Vol.17 No.6
In this paper, nonlinear transonic flutter analyses of a composite missile fin considering the effect of delamination are conducted. An effective modal analysis methodology is adopted and verified with the experimental modal test data for laminated composite plates with delamination. Extended version of the in-house computational aeroelastic analysis program with the transonic small-disturbance (TSD) code is used in order to predict the flutter dynamic pressure of the delaminated composite fin models. In the subsonic, transonic, and supersonic flow regions, nonlinear time-domain flutter analyses are performed for various delamination conditions, and aeroelastic characteristics due to the delamination phenomena are examined in detail.