http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
하중조건과 콜드조인트를 고려한 1년 양생된 OPC 콘크리트의 염화물 확산계수 평가
오경석,권성준,Oh, Kyeong-Seok,Kwon, Seung-Jun 한국구조물진단유지관리공학회 2017 한국구조물진단유지관리공학회 논문집 Vol.21 No.5
Cold joint caused by construction delay is vulnerable to shear stress and it allows more rapid chloride penetration and diffusion. In the paper, investigation of chloride diffusion coefficient is performed for 1-year cured concrete considering compressive and tensile loading level and cold joint. The results are compared with the previous results in 91-day cured concrete. In the 1-year cured concrete without loading, 10.7% and 10.5% of diffusion reduction are evaluated for those in 91-day cured concrete, respectively. The reduction ratios are almost similar however the result in cold joint concrete shows much higher values. The results in 1-year cured concrete under 30% and 60% of compressive loading show reduction of chloride diffusion by 10.9% and 5.8% compared with 91-day cured results, which is caused by steady hydration of cement particles, so called, time effect. In the case of tensile loading, the differences in results are not significant regardless of time effect and cold joint since micro cracks which is weak point of concrete is much dominant despite of long term curing. 시공지연 등으로 발생한 콜드조인트는 전단력에 취약하며 염화물 침투 및 확산을 촉진시킨다. 본 연구는 압축 및 인장하중과 콜드조인트 조건을 고려한 1년 양생된 콘크리트의 염화물 확산계수를 분석하였으며 선행연구인 91일 재령의 결과와 비교하였다. 91일 재령결과와 비교할 때, 하중을 재하하지 않은 일반적인 경우에는 건전부에서는 10.7%, 콜드조인트에서는 10.5%로 낮게 평가 되었다. 건전부와 콜드조인트의 감소율의 차이는 비슷하지만 염화물 확산계수는 콜드조인트에서 크게 발생하였다. 압축력 30%의 경우 건전부는 하중재하시 발생된 공극압밀로 인하여 확산계수가 감소하였다. 콜드조인트 콘크리트의 경우 365일 재령은 91일 재령보다 압축력 30%일 경우 10.9%, 압축력 60%일 경우 5.8% 확산계수가 낮게 평가되었는데, 이는 장기간 수중양생에 따른 지속적인 수화반응에 의해 확산계수가 낮게 평가되었기 때문이다. 인장력의 경우 압축부와는 다르게 동일 수준의 인장하중과 재령, 콜드조인트 유 무에 따른 확산계수의 차이가 비교적 크지 않았다. 이는 콘크리트가 1년 재령임에도 불구하고 인장력에 취약한 재료적 특성인 미세균열이 지배적인 영향으로 작용하였기 때문이다.
RC 구조물 높이와 해안가 거리를 고려한 염해에 대한 내구수명 평가
오경석(Oh, Kyeong-Seok),김영준(Kim, Young-Joon),이성희(Lee, Seong-Hee),권성준(Kwon, Sung-Jun) 한국건설순환자원학회 2016 한국건설순환자원학회 논문집 Vol.4 No.2
콘크리트 구조물의 내구수명평가는 주로 해석 변수의 변동성을 고려하지 않은 결정론적 방법과 변동성을 고려한 확률론적 방법이 사용되고 있다. 본 연구에서는 해안으로부터의 거리와 높이에 따른 내구수명 평가를 위해 일본토목학회에서 제안한 해안으로부터 거리에 따른 표면염화물량과 실태조사를 통한 높이에 따른 표면염화물량을 적용하였다. Fick's 2<sup>nd</sup> Law에 기반을 둔 Life-365를 이용한 결정론적 방법과 MCS을 이용한 확률론적 방법을 수행하여 내구수명을 평가하였다. 평가결과 확률론적 방법이 결정론적 방법보다 낮은 내구수명이 평가되었으며, 이는 기존에 연구된 확산계수, 피복두께, 표면염화물량 등의 변동계수뿐 아니라 낮은 목표내구적 파괴확률을 설정하였기 때문이다. 결정론적 방법에서는 해안가 250m 이내에서는 높이 60m 이상에서, 500m에서는 염해에 의한 피해를 고려하지 않아도 되는 것으로 평가되었다. 또한 확률론적인 방법에서는 전 구간에서 60m 이상의 지역, 250m 이내에서는 40m 이상의 구조물은 염해에 대하여 안전한 것으로 평가되었다. For an evaluation of service life in RC(Reinforced Concrete) structures, deterministic method and probabilistic method considering random variables of design parameters are usually adopted. In the work, surface chloride contents which vary with distance from sea shore and height are investigated from the previous research literature surveys, and they are considered for service life estimation. Through the analysis, the probabilistic method shows much lower results, which is due to variations of design parameters and very low intended durability failure. In the deterministic method, the structures within 250m and higher than 60m are evaluated to be free from chloride attack. In the probabilistic method, those higher than 60m in all the region and higher than 40m and 250m from sea shore are evaluated to satisfy the service life.
오경석(Oh, Kyeong-Seok) 충청남도역사문화연구원 2021 충청학과 충청문화 Vol.30 No.1
본 연구는 고려초기 충주유씨의 지방에서의 존재 양상과 중앙 진출 후의 존재 양상의 변화를 검토함으로써 고려 중앙의 지배층이 형성되는 과정을 살펴보고자 하였다. 삼국시대부터 충주는 지방지매의 거점 역할을 할 수 있는 지리적으로 중요한 지역이었다. 신라말기에 충주에서는 여러 지방세력이 활동하였고, 충주유씨 역시 그중 하나였으나 가장 강력한 세력은 아니었던 것으로 보인다. 그러나 충주유씨는 태조와 혼인관계를 맺음으로써 외척이 되고, 여러 인물이 중앙에 관료로 진출하고 능력을 입증하여 승진함으로써 중앙에서의 영향력을 확대해나가기 시작하였다. 다만, 정종이 즉위하기 전까지 충주유씨는 다른 세력을 압도할 만큼 중앙에서 세력을 갖춘 것은 아니었고, 정종의 즉위에 주도적인 역할을 했는지도 확인되지 않는다. 다만, 정종의 즉위 이후 충주유씨의 세력 결집이 발생했을 수 있고, 이 과정에서 충주유씨는 중앙 지배층으로의 정착하였던 것으로 보인다. 이를 통해 충주유씨가 고려 중앙의 지배층으로 정착한 것에는 고려왕실과의 혼인 및 개인의 능력을 통한 승진이 주요하게 작용하였음을 알 수 있다.
오경석(Kyeong Seok Oh) 한국유화학회 2017 한국응용과학기술학회지 Vol.34 No.3
Wax components can be precipitated when surrounding temperature decreases below wax precipitation temperature (WAT). WAT as well as pour point are important characteristics to evaluate the behavior of waxy oils. In this study, qualitative and quantitative evaluations of waxes in waxy model oils were presented after determining WAT and pour point. In case of anhydrous waxy model oils, ASTM D2500 may be most useful to determine WAT because of the transparent nature of model oils. With same apparatus, ASTM D97 is also applicable to determine the pour point of waxy oils in a serial determination. In case of emulsified model oils, however, it is difficult to measure WAT because of its opaque nature. This study employed FTIR spectroscopy to determine wax precipitation temperature and discussed the effect of emulsion state regarding the values of WAT. Further study would be needed to conclude the effect of water contents to WAT values in case of emulsified waxy oil. 파라핀 왁스가 녹아있는 왁스오일은 주위 온도가 내려감에 따라 왁스의 침전이 시작된다. 침전이 시작하는 온도를 왁스생성온도라 부르며, 왁스생성온도는 유동점 측정과 함께 왁스오일의 거동연구에 중요한 정보를 제공해 준다. 본 연구에서는 왁스가 함유된 모델오일을 제조하여, 왁스의 정량과 정성적인 차이에 따른 왁스생성온도와 유동점의 변화를 살펴보았다. 물이 포함되지 않은 왁스함유 모델오일의 경우, 그 투명성으로 인해 ASTM D2500을 통해 왁스생성온도 측정이 가능하다. 또한, 유동점 측정도 같은 장치를 사용하는 ASTM D97을 사용하여 측정할 수 있다. 물이 함유된 에멀젼 모델오일의 경우에는 시료의 불투명성으로 인해 우선 유동점을 중심으로 거동을 살펴보았다. 이후 에멀젼 모델오일의 왁스생성온도 측정은 적외선분광법을 활용하여 측정하였으며, 에멀젼을 형성하는 물의 함량에 따른 왁스생성온도의 경향성은 고찰을 통해 추가적인 실험이 필요할 것으로 판단되었다.