RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
        • 등재정보
        • 학술지명
        • 주제분류
        • 발행연도
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        고검화도의 폴리(비닐 알코올)/디메틸설폭사이드 용액에서의 점성도 특성과 탐침입자의 확산

        엄효상(Hyo Sang Eom),박일현(Il Hyun Park) 한국고분자학회 2010 폴리머 Vol.34 No.5

        고검화도(98%이상)의 풀리(비닐 알코올) (PVA)를 디메틸설폭사이드(DMSO) 용매에 녹인 뒤 PVA 준희박용액 대에서 농도 C=0.14g/mL까지 점성도를 측정하였으며, 이 시스템을 매트릭스로 하여 폴리스티렌(PS) 라텍스 입자의 확산운동 지연을 동적 광산란법으로 조사하였다. PVA/DMSO계의 점성도를 고유점성도 [η]로 스케일된 환산농도 C[η]에 대하여 도시하였을 때 C[η]>2에서는 분자량 의존성이 강하게 나타났으며, 그 원인은 PVA 용액 내에 존재하는 불균일 영역때문인 것으로 추정하였다. 그러나 매트릭스 내에서 탐침입자의 확산운동은 모든 측정농도에서 단일모드로 관찰되었고, 용액상 및 용매상에서의 확산계수의 비인 D/D(o)를 C[η]로 도시할 때 전체 농도 범위에서 분자량 의존성은 전혀 나타나지 않았으나 신장지수함수의 적용 한계는 C[η]>2.5인 것으로 관찰되었다. Poly (vinyl alcohol) (PVA) with high degree of hydrolysis of above 98% was dissolved in dimethyl sulfoxide(DMSO), and the shear viscosity was measured up to C=0.14g/mL in the semi-dilute solution regime. Next, as probe particle, polystyrene (PS) latex was introduced into this matrix system and its delayed diffusion due to polymer concentration was investigated by means of dynamic light scattering. When the solution viscosity of PVA/DMSO was plotted against the reduced concentration C[η]. Which is scaled by the intrinsic viscosity, the molecular weight dependence was strongly appeared at C[η]>2. Some heterogeneties in polymer solution were considered as its source. Contrary, the diffusion of probe particle in the matrix solution was observed as a single mode motion at whole concentration range but its ratio of its diffusion coefficient at solution to that at solvent, D/D(o) did not show any molecular weight dependence at all. However, the application limit of the stretched exponential function was disclosed at C[η]>2.5.

      • KCI등재

        동적 광산란법에 의한 폴리(비닐 알코올)/디메틸설폭사이드/폴리스티렌 라텍스 계에서의 고분자 사슬 배제층 측정

        엄효상(Hyo Sang Eom),박일현(Il Hyun Park) 한국고분자학회 2012 폴리머 Vol.36 No.5

        폴리(비닐 알코올)(PVA)/디메틸설폭사이드 용액에 폴리스티렌 라텍스 구형입자(직경 범위: 100~300 nm)를 소량 첨가한 뒤, 구형 입자 표면에 형성된 사슬 배제층 두께가 사슬의 농도에 따라 어떻게 의존하는지를 동적 광산란법으로 조사하였다. 묽은 용액 농도에서는 배제층의 두께가 PVA 사슬의 회전반경의 63±3% 수준에서 일정하게 유지되었었으나 준희박 용액 농도의 초기 영역인 1.5≤C[η]≤3 범위에서는 배제층 두께 δ의 고분자 농도 의존성은 이론치 -0.75와 비슷한 δ~C-0.8로 얻어졌다. 보다 높은 농도 C[η]>3 이상에서는 배제층의 두께가 급격히 감소하는 것으로 나타났는데 그 이유는 탐침입자간 Oosawa 인력에 의하여 유발된 응집효과가 그 원인인 것으로 설명할 수 있었다. The polymer concentration dependence of depletion layer was investigated by means of dynamic light scattering after the very small amount of polystyrene spherical latex particles was added into the matrix solution of poly(vinyl alcohol)(PVA)/dimethyl sulfoxide. At the dilute regime, the magnitude of depletion layer kept constant at the level of 63±3% of the radius of gyration of the corresponding PVA chain. Next, at the early semi-dilute regime of 1.5≤C[η]≤3, polymer concentration dependence of the layer thickness δ was obtained as δ~C-0.8, and this experimental value was very close to theoretical one of -0.75. However it was observed above C[η]>3 that its thickness decreased abruptly, and this was ascribed to aggregation effect of latex particles which was driven by Oosawa type attractive interaction.

      • KCI등재
      • KCI등재

        태양전지 봉지재용 에틸렌 비닐 아세테이트 공중합체 필름의 광열화 거동

        김문호(Mun Ho Kim),엄효상(Hyo Sang Eom),변두진(Doo-Jin Byun),최길영(Kil-Yeong Choi) 한국고분자학회 2016 폴리머 Vol.40 No.3

        본 연구에서는 태양전지 봉지재로 사용되는 ethylene/vinyl acetate (EVA) 필름 소재의 광열화 거동을 분석하였다. 광열화 실험에서는 태양광 하에서의 광열화를 모사하는 것이 중요하기 때문에 태양광과 유사한 제논 아크 램프를 사용하여 실험을 진행하였다. 소재의 광열화는 표면에서 주로 발생하기 때문에, 표면의 형상 및 조성, 그에 따른 광학특성의 변화를 분석하였다. 광열화가 진행되면 EVA 필름의 표면에 미세 크랙과 같은 결점들이 생성됨을 확인하였는데, 이러한 표면 형상의 변화는 광투과 특성에도 영향을 미쳐서 전체적인 광투과가 감소하였다. 또한 광산화반응으로 소수 특성을 유지해야 할 필름의 표면에 친수기들이 생성되어, 태양전지 모듈의 성능 및 수명에 주요한 영향을 미칠 수 있음을 확인하였다. 마지막으로 광원의 차이에 따른 광열화 거동을 분석하여, 가속시험 설계를 위한 광원 선택의 중요성을 확인하였다. In this study, we investigated the photodegradation behavior of an ethylene/vinyl acetate (EVA) film for solar cell encapsulant. The EVA film was exposed to the weathering apparatus, equipped with a xenon-arc lamp for simulated sunlight exposure conditions. Since photodegradation mainly induces changes and variations on the materials surface, a variety of technical approaches were employed to characterize the modifications of the EVA film surface, and then the deterioration behavior of optical properties was discussed in term of the morphological changes. And also, photodegradation caused the composition modification of the EVA film surface by the incorporation of oxygen to the polymer chains, which could make the wettability of the film hydrophilic. Finally, the photo-induced deformation behavior of the EVA film influenced by the light intensity depending on the type of lamp was discussed in order to show the importance of the light source.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼