http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
동력 분기 하이브리드 전기 자동차의 운행 모드 시뮬레이션
안국현(Ahn, Kuk-Hyun),조성태(Cho, Sung-Tae),임원식(Lim, Won-Sik),박영일(Park, Yeong-Il),이장무(Lee, Jang-Moo) 한국신재생에너지학회 2006 한국신재생에너지학회 학술대회논문집 Vol.2006 No.06
The power split hybrid power train is considered to be one of the most prospective configuration for the hybrid electric vehicle (HEV). Toyota Prius, representing this type of vehicle, showed outstanding performances in fuel efficiency, emission reduction and acceleration. The excellence is largely due to the fact that it utilizes almost all operation modes of HEV. Those modes include ZEV (Zero Emission Vehicle) driving, idle stop, fuel cut-off, power assist, active charging, regenerative braking and so forth. In this paper, a few of the mode operations were simulated using AVL Cruise. Also, control logics to operate the powertrain in each mode were developed. The states of powertrain components were displayed and analyzed. By controlling the three components (engine, motor and generator), it was possible to run the powertrain in several hybrid operation modes.
동력 분기 하이브리드 전기 자동차의 운행 모드 시뮬레이션
안국현(Ahn, Kuk-Hyun),조성태(Cho, Sung-Tae),임원식(Lim, Won-Sik),박영일(Park, Yeong-Il),이장무(Lee, Jang-Moo) 한국신재생에너지학회 2006 신재생에너지 Vol.2 No.2
The power split hybrid powertrain is considered to be one of the most prospective configuration for the hybrid electric vehicle (HEV). Toyota Prius, representing this type of vehicle, showed outstanding performances in fuel efficiency, emission reduction and acceleration. The excellence is largely due to the fact that it utilizes almost all operation modes of HEV. Those modes include ZEV (Zero Emission Vehicle) driving, idle stop, fuel cut-off, power assist, active charging, regenerative braking and so forth. In this paper, a few of the mode operations were simulated using AVL Cruise. Also, control logics to operate the powertrain in each mode were developed. The states of powertrain components were displayed and analyzed. By controlling the three components (engine, motor and generator), it was possible to run the powertrain in several hybrid operation modes.
최적 제어와 신경회로망을 이용한 하이브리드 전기자동차 시뮬레이션
김남욱(Kim, Nam-Wook),안국현(Ahn, Kuk-Hyun),조성태(Cho, Sung-Tae),임원식(Lim, Won-Sik),이장무(Lee, Jang-Moo) 한국신재생에너지학회 2005 한국신재생에너지학회 학술대회논문집 Vol.2005 No.06
The energy management of an HEV using optimal control and global optimization is thought to be closest to the best operation of the system. However, there are some controversies on the ways of defining the optimization problems and constituting the optimal control simulators. Here, we presented a simulator which adopts the concept of equivalent fuel economy and leads the vehicle to run in a more efficient way. In order to realize the optimal operation of the HEV and check the validity of the control logics, we also developed a forward-facing simulator. The simulator was developed with the Cruise and MATLAB co-simulation interface. Especially, neural network controller was used for the hybrid control module in the simulator. With the simulator, the optimal operation could be converted into hybrid control rules and the validity of the operation was verified.
토크 및 모멘트부하의 영향을 고려한 로봇 관절의 마찰 모델
김태정(Tae Jung Kim),안국현(Kuk-Hyun Ahn),송재복(Jae-Bok Song) 대한기계학회 2021 大韓機械學會論文集A Vol.45 No.1
로봇 관절에서 발생하는 마찰은 제어시스템에 외란으로 작용하여 제어성능을 악화시키는 요인으로 작용한다. 따라서 대부분의 로봇에서는 마찰 모델을 기반으로 추정한 마찰토크를 제어입력에 반영하여 마찰을 보상하며, 마찰 모델이 정확할수록 로봇의 제어성능을 향상시킬 수 있다. 본 연구에서는 로봇링크의 하중에 의해서 발생하는 토크부하와 모멘트부하의 영향으로 다르게 발생하는 마찰 거동을 파악한다. 이를 통해 기존의 쿨롱마찰과 점성마찰로 구성된 마찰 모델에 토크부하와 모멘트부하의 영향을 고려한 항을 추가하여 보다 정확한 마찰 모델을 제안한다. 제안한 마찰 모델은 7자유도 협동로봇에 적용하여 실험을 통해 성능을 검증하였다. The friction generated in a robot joint acts as a disturbance in a control system, which affects the control performance. Therefore, in most robots, friction is compensated for by adding the estimated friction value in the control input based on the friction model. Thus, the more accurate the friction model, the better the control performance of the robot. In this study, the friction that occurred differently owing to the torque and moment loads caused by the robot links were analyzed. Through the analysis, a friction model that included the effects of torque and moment loads from the robot links was developed to improve the conventional friction model based on only the Coulomb friction and viscous friction. The proposed friction model was verified experimentally by applying the model to a 7DOF collaborative robot.
양호림(Yang, Ho-Rim),김남욱(Kim, Nam-Wook),안국현(Ahn, Kuk-Hyun),조성태(Cho, Sung-Tae),임원식(Im, Won-Sik),이장무(Lee, Jang-Moo) 한국신재생에너지학회 2006 한국신재생에너지학회 학술대회논문집 Vol.2006 No.06
최근 여러 연구에서 다양한 종류의 멀티 모드 하이브리드 동력 전달계가 제안되고 있다. 멀티모드 동력전달계는 두 개 이상의 다른 유성기어식 하이브리드 시스템으로 이루어져 있으며 클러치를 사용하여 각 상황에 유리한 유성기어 시스템을 사용하여 주행한다. 각 유성기어 시스템의 단점들을 보완할 수 있기 때문에 단일 모드를 사용하여 주행했을 때보다 여러 면에서 높은 성능을 보인다. 일반적으로 유성기어식 하이브리드 시스템은 크게 입력, 출력, 복합 분기식의 세 가지 종류로 나눌 수 있는데 이 논문에서는 입력 및 복합 분기식 구조의 특징을 분석해 보았다. 또한 시뮬레이션을 통해 입력, 복합 분기식 구조를 사용하여 듀얼 모드를 구성하였을 때 단일 모드와 비교하여 어느정도의 성능을 보이는지 알아보았다.