http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
카메라 및 내비게이션 연동 지능형 헤드램프 성능 평가 기술 연구
신외경(Waegyeong Shin),서동현(Donghyun Seo),문희석(Heeseok Moon),손영호(YoungHo Son),한덕구(Deokgu Han) 한국자동차공학회 2013 한국자동차공학회 부문종합 학술대회 Vol.2013 No.5
Technologies have been developed actively to enhance safe driving in the intelligent automobile technology field and the head lamp technology is taking an important part of the development. Currently, adaptive front lighting system integrated with camera or navigation is under development, and it provides the beam pattern actively optimized according to various road conditions to give a wider view to enhance safe driving, and this study intends to develop an optimized method for evaluating the system which integrates the camera technology and navigation technology with the head lamp technology. An environment capable of evaluating head lamp technology with navigation and camera was developed in a simple actuator control technology oriented evaluation environment by using the vehicle simulator and GPS radiation system.
차량 시뮬레이터 기반의 DHB 헤드램프 평가 환경 구축
신외경(WaeGyeong Shin),조재동(Jaedong Cho),문희석(HeeSeok Moon),김종운(JongWoon Kim),한덕구(DeokGu Han) 한국자동차공학회 2011 한국자동차공학회 부문종합 학술대회 Vol.2011 No.5
This study covered about the establishment of evaluation environment for DHB headlamp using virtual vehicle simulator. Because the performance evaluation of headlamp has time and space restraints, the novel method is needed. In this research, the environment of performance evaluation for the DHB headlamp was established based on the simulator for vehicle. The virtual motor way was realized and the scenario for lamp test was established. And the test of lamp had been using a test bed.
전기자동차 구동 전동기의 고효율 운전을 위한 싸이리스터 소자 적용 전동기 직병렬 권선 절환 회로 연구
신양진(Yangjin Shin),조수연(Suyeon Cho),정호창(Hochang Jung),조재익(Jaeick Cho),신외경(Waegyeong Shin) 대한기계학회 2021 대한기계학회 춘추학술대회 Vol.2021 No.4
자동차 시장은 유가변동에 따른 연료비 부담 심화 및 강화되는 이산화탄소 배출 규제 등의 영향으로 친환경 자동차 시장 확대와 함께 전기 자동차의 연비 향상을 위한 기술 개발 경쟁이 가속화되고 있다. 일반적으로 전기 자동차의 모터 구동 시스템은 넓은 속도 영역에서의 동작이 요구되지만 모터의 고효율 영역은 제한되어 있어, 실제 최빈 동작점인 도심 운전(저속 영역) 및 고속도로 운전(고속 영역)에서는 효율 저하가 발생한다는 문제점이 있다. 따라서 이러한 문제를 해결하기 위해 모터의 전 속도영역에서 고효율을 성취할 수 있도록 전기 자동차의 운전 속도에 따라서 모터 권선의 구조 변경을 통해 전자기적 특성을 바꿔주는 변속 시스템 개발이 요구되고 있다. 기존의 기계적 스위치로 구성된 변속 시스템의 경우 회로의 수명이 제한적이고 절환 시간이 길어 절환 시간 동안 모터의 전류 및 토크 단절이 발생한다는 문제가 있어 전기 자동차에 적용하는데 한계가 있다. 선진사 일본 야스가와 전기 사의 경우 적은 수의 전기적 스위치로 구성된 중성점 절체식 권선 절환 회로를 전기 자동차의 구동 시스템에 적용시켜 기계적 스위치를 사용한 권선 절환 방식의 수명 문제와 구동 단절 특성을 해결하여 절환 시간을 단축시켰다. 그러나 권선 절환 회로에서의 도통 손실이 크게 발생하여 전체 시스템의 효율을 저하시키며, 절환 시 발생하는 권선의 서지 에너지를 흡수하기 위해 별도의 스너버 회로가 필요하다는 단점이 있다. 제안하는 Thyristor 소자를 적용한 권선 절환 회로는 저속 운전에서는 모터 권선을 직렬로 연결, 고속 운전에서는 병렬로 연결시켜 직병렬로 권선 절환을 통해 전기 자동차의 넓은 속도 영역에서 고효율을 성취할 수 있도록 한다. 또한 기존 선진사 회로와 달리 권선 절환 시에 Thyristor 소자의 특성을 이용하여 과도 상태가 없는 절환을 할 수 있어서 별도의 스너버 회로가 필요 없다. 제안하는 Thyristor를 이용한 직병렬 권선 절환 회로는 구성하는 스위치 소자의 개수가 비교적 많아 별도의 드라이버 회로가 필요하다는 단점이 있지만, 전체 도통 손실이 선진사 회로에 비해 30%정도 저감되어 방열 시스템의 설계가 용이하고 그만큼 부피를 작게 할 수 있다는 장점이 있다. 제안한 권선 절환 회로의 타당성을 검증하기 위해 80kW 급 PMSM 과 인버터를 연계하여 동작을 검증하였다. This paper propose a series-parallel thyristor winding changeover circuit that can maximize the efficiency in the wide speed range to extend the driving distance of the Electric Vehicle. Proposed circuit is Series-Parallel changeover circuit based thyristor. Due to the characteristics of the thyristor, it is possible to achieve a seamless transient state without interruption. So no additional snubber circuit is required and high efficiency and light weight of AC motor system can be expected because of low switch loss. The proposed winding changeover circuit is validated through simulation and experimental results with 80kW AC motor.