http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
WO3의 첨가에 따른 V2O5/TiO2 촉매의 저온 SCR 성능개선
부진호,박노국,강도형,서명조 한국에너지기후변화학회 2022 에너지기후변화학회지 Vol.17 No.2
In this study, the catalytic activity of V2O3-WO3/TiO2 for NH3-SCR(Selective Catalytic Reduction) wasinvestigated at low temperatures below 230 °C. The V2O3-WO3/TiO2 catalysts were prepared by impregnating vanadiumand tungsten precursors on commercially available TiO2 powder. The NO conversion was measured according to theamount of WO3 and the thermal treatment temperature of the catalyst. Based on the experimental results, the highestcatalytic performance for NH3-SCR was obtained when 5 wt% of WO3 was added into V2O5/TiO2. In addition, the calcinationtemperature was optimized to 300 °C to maximize the catalytic activity. XRD and XPS results suggested that vanadiumand tungsten ions were partially dissolved into the TiO2 crystal lattice. The doping of vanadium and tungsten on the TiO2crystal structurer enhanced NO removal performance of the catalyst at a low temperature.
V₂O5-MnO₂/TiO₂촉매가 분산된 PTFE 촉매 섬유소재의 제조 및 탈질성능 평가
부진호(Jinho Boo),권병찬(Byung Chan Kwon),박노국(No-Kuk Park),강도형(Dohyung Kang),이장훈(Jang Hun Lee),황상연(Sang Yeon Hwang),서명조(Myung Jo Seo) 한국에너지기후변화학회 2021 한국에너지기후변화학회 학술대회 Vol.2021 No.11
초미세먼지 발생원으로 주목받고 있는 연소공정에서 배출되는 질소산화물을 제거하기 위한 SNCR 및 SCR공정의 배출허용규제가 강화될 것으로 예상되며, SNCR에 의한 탈질공정은 고온에서 운전되고 탈질효율이 약 60% 정도에 그치므로, 이를 대비하여 SCR에 의한 2차 처리를 해주는 탈질공정의 개선이 요구되고 있다. 여과백 소재인 PTFE 섬유에 촉매를 담지하는 방법에는 표면 코팅기법과 섬유제조 과정에서 고분자 섬유질 내에 고분산하는 방법이 연구되고 있는데, 본 연구에서는 PTFE 섬유사 내에 촉매를 분산시키기 위한 연구가 진행되었다. 본 연구에서는 집진에 이용되고 있는 PTFE 여과포 소재의 제조과정에서 먼저 V₂O5/TiO₂ 탈질촉매를 분산시켜 여과포 섬유 자체에 탈질기능을 부가하고자 하였다. 추가적으로 MnO₂/TiO₂와 V₂O5-MnO₂/TiO₂의 NH₃-SCR전환율을 비교분석하였다. V₂O5/TiO₂ 탈질촉매는 함침법에 의해서 대량으로 제조하였으며, 제조된 분말 촉매를 PTFE 분말과 혼합하여 로드를 제조한 후, 제유 및 연신공정을 거쳐 촉매가 분산된 PTFE 섬유사를 제조하였고, 탈질촉매가 분산된 PTFE 섬유사의 탈질성능을 조사하기 위하여 고정층 반응기에서 온도에 따른 NH₃-SCR 반응에서 탈질성능을 비교하였다. 또한, PTFE 섬유사 내에 촉매의 분산상태 및 함유량을 확인하기 위하여 주사전자현미경(SEM)과 실체 현미경을 이용하여 PTFE 섬유사 표면형상을 관찰하였으며, TG실험으로부터 촉매 담지량을 측정하였다. 표면분석 결과로부터 미세 촉매입자가 PTFE 섬유사 내에 분산된 것이 확인되었다.
Pt/Al2O3 및 Pt/SiO2의 합성과 MEK 저온 산화반응에 활용
고은희,부진호,권병찬,박노국,강도형,윤대식 한국에너지기후변화학회 2022 에너지기후변화학회지 Vol.17 No.1
γ-Al2O3 and silica were used as supporting materials of Pt-based catalysts for low-temperature oxidation of volatile organic compounds. While Pt/γ-Al2O3 was synthesized using alumina powder by an impregnation method, Pt/SiO2 was prepared using silica-sol. As this time, the content of Pt was 1 wt% of the total catalyst weight. The concentration of the slurry to coat honeycomb with Pt-based catalysts was optimized as 30 wt%. Honeycomb catalysts coated with Pt/γ -Al2O3 and Pt/SiO2 were tested for low-temperature oxidation of methyl ethyl ketone. The catalytic activity of Pt/SiO2 was higher than that of Pt/γ-Al2O3 in the low-temperature region below 200 °C. This might be due to the smaller size of Pt particles on silica than γ-Al2O3 supports. In addition, it can be seen that this is because the stable reaction activity of silica suppresses inactivation due to the low acid point of silica.