http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박정재,구자용,김병선,Park, Jung-Jae,Ku, Cha-Yong,Kim, Byung-Sun 한국공간정보학회 2007 한국공간정보학회지 Vol.15 No.1
토지피복도는 지표면의 상태를 나타내는 자료로 특히 환경 분야에서 지역의 현황을 파악하고 정책을 수립하기 위한 기초적인 자료이다. 토지피복도를 효과적으로 제작하기 위해서는 인공위성을 이용하여 한 지표면 현황에 대한 정보를 신속하게 수집하고, 이를 지리정보로 변환하여 구축하고 관리하여야한다. 본 연구에서는 우리나라 환경부에서 구축한 중분류 토지피복도의 제작과정을 검토하고, 이를 객관적이고 구체적으로 개선하고자 한다. 이를 위하여 국내외의 토지피복도 제작 현황과 문제점을 파악한 후, 중분류 토지피복도를 제작하기 위한 구체적이고 효과적인 개선방안을 제시하였다. 본 연구에서 제시한 경계선 설정기준과 속성정보 부여기준은 기존의 토지피복도 제작과정에서 나타난 문제점을 보완할 수 있었다. The land cover map represent the state of earth surfaces. It can be used as basic data to explore present conditions of earth surfaces and develop future plans for local areas. To produce the land cover map with efficiency, gathering geographic information from satellite images is important. Exporting, building, and managing processes on the land cover information are needed as well. In this study we aim to review the producing process of the level-2 land cover map in detail and enhance it. h present status of the producing process of the land cover map in Korea is reviewed, problems of the process are explored, and measures for improving it are proposed. The criteria for fixing boundaries and providing attributes for the land cover map are proposed. This proposed criteria may solve problems in a present producing process. The improving measures proposed in this study should be continuously revised in future studies.
박정재,김명주,Park, Jeong-Jae,Kim, Myung-Joo 대한치과보철학회 2015 대한치과보철학회지 Vol.53 No.4
목적: 한국 성인 유치악자를 대상으로 치아와 안모 사이의 크기 및 형태적인 상관관계, 구강 내 해부학적 기준점들과 치아배치 양상 사이의 관계를 조사하여 총의치 제작 시 무치악 환자 치료에 사용되는 기준점들의 효용성을 평가하고자 하였다. 대상 및 방법: 서울대학교 치의학 대학원생을 대상으로 상악 6전치가 정상적으로 배열되어 있는 성인 남성 270명 여성 280명을 선정하여 연구를 수행하였다. 악안면부의 해부학적 구조를 크게 변화시킬 수 있는 외과적 치료를 받은 경우, 교정치료를 받은 경우, 선천적으로 상악 전치부 치아 형태 및 수에 이상이 있는 경우, 상악 전치부 치관의 변형을 초래할 수 있는 수복치료를 받은 경우는 연구대상에서 제외하였다. 연구항목은 안모의 외형, 협골궁 폭경, 안모의 길이, 상악중절치의 형태 및 장경, 상악6전치의 치관 폭경, 견치간 거리, 절치유두 중심에서 중절치 순면까지의 거리, 절치유두 중심에서 양견치 첨단을 지나는 선까지의 수직거리이었다. 이를 바탕으로 안면계측항목과 모형계측항목간의 비율 및 상관관계를 통계적으로 분석하였다. 결과: 본 연구의 한계 내에서 다음과 같은 결과를 얻었다. 1) 안모의 외형과 상악 중절치의 형태가 일치하는 비율은 남성 55.56%, 여성 46.43%, 전체 50.91%이었다. 1) 협골궁 폭경과 상악중절치 폭경, 상악6전치 연합폭경의 비율은 각각 16.8 : 1, 3.0 : 1이며 통계적으로 양의 상관관계가 있었다. 2) 상모학상 안모의 길이(Trichion-Gnathion)와 상악중절치 치관 장경, 코뿌리점-턱끝융기점간 거리(Nasion-Gnathion)와 상악중절치 장경과의 비율은 각각 19.7 : 1, 11.6 : 1이었고 남성에서는 코뿌리점-턱끝융기점간 거리가, 여성에서는 안모의 길이가 더 큰 상관관계가 있었다. 3) 절치유두 중심과 양 견치첨단을 연결하는 선 사이의 수직거리는 $1.33{\pm}1.08mm$이었다. 4) 절치유두 중심에서 중절치 순면까지의 거리는 $9.23{\pm}1.20mm$이었다. 결론: 총의치 제작에 사용되는 기준점들은 한국 성인 유치악자의 경우에도 통계적으로 효용성을 가지며, 중요한 해부학적 지표가 임상적으로 의미를 가진다고 할 수 있다. 그러나 통계적으로 수치에서 차이를 보이고 개별적인 편차를 가지므로 인공치아의 선택이나 배열 후 환자의 동의를 받는 과정이 필수적이라고 할 수 있다. Purpose: The purpose of this study was to evaluate the validity of reference points for edentulous patient by examining the correlation of teeth and face, and intraoral anatomic landmarks. Materials and methods: We examined a facial outline, length, bizygomatic width, nasion - gnathion length, glabella - nasion distance in 270 men and 280 women satisfied with inclusion criteria from Seoul National School of Dentistry. The shape of maxillary central incisor, mesiodistal crown width and length of maxillary 6 incisors, distance from incisive papilla to labial surface of maxillary central incisor, and perpendicular distance from incisive papilla to intercanine line were measured in the stone model. We analyzed the ratio and relevant relation statistically. Results: The probability on having the same shape of face and the relative same shape maxillary incisor was 55.56% and 46.43% for men and women. The facial length proved to be a more valuable measurement in women in the tooth selection. The ratio of bizygomatic width to mesiodistal width of maxillary central incisor, and the ratio of bizygomatic width to width of maxillary 6 incisors were 16.8 : 1 and 3.0 : 1 and were positively correlated with each other. The distance of the canines from the maxillary incisal papilla was $1.33{\pm}1.28mm$. The distance between the center of the incisal papilla and the labial surface of their maxillary central incisor was $9.23{\pm}1.20mm$. Conclusion: It was showed that anatomical reference points in tooth selection and arrangement for edentulous patient are useful and have validity in our limited study.
공초점 원리와 광섬유 광원 변조를 이용한 무한보정 현미경 자동초점
박정재,김승우,이호재,Park, Jung-Jae,Kim, Seung-Woo,Lee, Ho-Jae 한국광학회 2004 한국광학회지 Vol.15 No.6
비전을 이용한 광학식 검사공정이나 그 밖의 광학 현미경을 이용한 측정에 있어서 초점조절은 곧바로 측정 정밀도에 영향을 주는 중요한 요소이다. 본 논문에서는 핀홀 대신 광섬유를 사용하는 공초점 현미경 구조와 하나의 광섬유가 광원과 검출기의 역할을 동시에 수행하는 상반구성(reciprocal scheme)을 적용함으로써 간결하게 시스템을 구성하면서 광축 정렬을 용이하게 하였으며, 압전소자(PZT)를 이용한 광섬유 광원의 광축 방향 변조를 통해 방향 정보가 실린 초점오차 신호를 획득함으로써 빠른 초점조절을 구현하였다. 대물렌즈 변조방식과 달리 광원 변조방식은 현미경 시스템에 미치는 물리적 영향을 줄일 수 있으며, 기존의 장치에 탑재가 비교적 용이하다는 장점을 갖는다. 본 논문에서는 변조 진폭과 시편의 반사도 및 기울기 변화에 따른 초점오차 신호의 변화를 측정하였으며, 거울 시편에 대한 초점조절을 통해 본 시스템의 성능을 평가해 보았다. 또한 종방향 특성곡선의 반치폭 비교실험을 통해 광원 변조는 광축 방향 분해능에 영향을 주지 않음을 확인하였다. The autofocus is one of the important processes in the automated vision inspection or measurements using optical microscopes, because it influences the measuring accuracy. In this paper, we used the confocal microscope configuration based on not a pinhole but a single-mode optical fiber. A single mode fiber has the functions of source and detector by applying the reciprocal scheme. As a result, we acquired a simple system configuration and easy alignment of the optical axis. Also, we embodied a fast autofocus system by acquiring the focus error signal through a source modulation technique. The source modulation technique can effectively reduce physical disturbances compared with objective lens modulation, and it is easily applicable to general optical microscopes. The focus error signal was measured with respect to the modulation amplitude, reflectance of the specimen and inclination angle of the measuring surface. The performance of the proposed autofocus system was verified through autofocusing flat mirror surface. In addition, we confirmed that source modulation rarely degrades the depth resolution by the comparison between the FWHMs of axial response curves.