http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김진용,김성열,이금원 한국융합신호처리학회 2003 융합신호처리학회 논문지 (JISPS) Vol.4 No.4
Due to the asymptotic property, deadbeat control which is well used in digital control system can not be applied to the continuous time system. But recently by use of the finite Laplace Transform to transfer function and establishment of some settling conditions, CDBC(Continuous time Deadbeat Control) is studied. For CDBC design, transfer function is constituted with delay elements and then order and interpolation conditions are derived. In other way, digital deadbeat controller is implemented and it's output is changed to continuous type by smoothing elements. In this paper multirate sampling is used and so inner controller is sampled faster than output feedback loop. And End order smoothing elements is placed to the output of digital deadbeat controller. By the multirate sampling overall output response is improved. The controller is impleneted as a serial integral compensator in the forward path and a local feedback compensator introduced into the outpute feedback loop. Matlab Simulink is used for simulation. 디지털제어에 잘 사용되어 온 유한정정제어를 연속계에 적용하기는 연속계의 점근성 때문에 어려운 것으로 알려져 있다. 그러나 유한 Laplace변환을 전달함수에 적용하고 여기에 정정조건을 적용하여 제어기를 설계한 연속계 유한정정제어기(CDBC, Continuous-time Deadbeat Controller)에 대해서 연구가 되고 있다. 이에 따라 지연요소가 전달함수에 사용되어 정정을 위한 차수 및 보간조건이 유도되어 제어기가 설계되거나, 디지털 유한정정제어기를 설계하고 이를 연속계 제어기로 변환하기 위해 평활요소로 사용하여 CDBC를 구성하기도 한다. 본 논문에서는 다중 샘플링을 적용하여 제어기와 출력귀환루프의 샘플링 속도를 달리하였으며, 2차 평활요소를 디지털 유한정정제어기에 사용한 CDBC를 연구한다. 이러한 다중 샘플링은 샘플링 주기 동안에 제어루프를 또 샘플링하여 전체적인 출력응답을 개선할 수 있다. 제어기는 직렬 적분 보상기를 전향경로에 배치하고 지역 귀환보상기를 귀환 루프에 도입한다. Matlab Simulink을 사용하여 시뮬레이션을 한다.
김진용,김성열,이금원 한국융합신호처리학회 2002 융합신호처리학회 논문지 (JISPS) Vol.3 No.1
본 논문은 2차 평활요소를 사용한 최적 연속계 유한정정 서보시스템의 새로운 설계법을 제시한다. 직렬 적분 보상기와 지역 귀환보상기를 상태귀환 루프에 도입하여 연속유한정정제어기를 만든다. 평활요소의 감쇄비와 고유 각주파 수의 결정법을 서술한다. 입출력 특성이 어떻게 개선되는지를 수치예제를 통하여 보인다. 특히 임의의 시간에 인가되는 외란 및 가변 입력에 대한 CDBC를 설계하는 방법을 제시한다. This paper presents a new design method of optimal continuous deadbeat controller by using second-order smoothing elements. The continuous deadbeat controller is made of a serial integral compensator and a local feedback compensator introduced into the state feedback loop. The decision method of the damping factor and the natural angular frequency of the smoothing element is described. A numerical example is given to show how well input-output characteristics are improved. Especially according to the variable input and disturbance, corresponding CDBC design method is suggested. By computer simulations, control inputs and system outputs are shown to have desirable property such as smoothness.
Compomer의 치면처리방법에 따른 전단 결합 강도에 관한 연구
김진용,홍찬의 大韓齒科保存學會 1998 Restorative Dentistry & Endodontics Vol.23 No.1
To evalutate the change in shear bond strength according to dentin surface treatment, 4 materials were divided into control group(A) and experimental group(B). Group A was treated according to the instruction of manufacture. Group B was treated with 32% phosphoric acid. After dentin surface treatment, each material was bonded and stored in 100% humidity during 7 days, and then, the shear bond strength was evaluated. The results were as follows : 1. In the case of treatment according to the instruction of manufacture, the shear bond strength according to material showed Z-100 to be highest with 12.42 MPa, Compoglass had the lowest shear bond strength with 4.23 MPa and there was significant difference between Compoglass and Z-100, Dyract (p<0.01). 2. The group treated with 32% phosphoric acid showed lower shear bond strength than that of the group treated according to the instruction of manufacture but there was no statistical significance. 3. As a result of observation under SEM, the fracture pattern was a mixture of cohesive and adhesive failure in group 1, and there was more adhesive failure in group 2, and in group 3 and 4 there was cohesive failure of material or tooth structure. From the results above Dyract showed shear bond strength levels between resin and resin-modified glass ionomer but Compoglass showed much lower shear bond strength than that of resin-modified glass ionomer thus indicating that even though they are the same type of material they show evident differences in physical properties. And it is thought that the treatment of dentin surface with phosphoric acid did not increase the shear bond strength, unlike enamel.
김진용,송찬후 한국기술혁신학회 2014 한국기술혁신학회 학술대회 발표논문집 Vol.2014 No.10
최근 팀 다양성이 팀 창의성에 미치는 영향에 대한 연구가 주목을 받고 있으나 팀 다양성이 팀 창의성으로 발현되는 과정과 팀 다양성의 조건 하에서 팀 창의성이 촉진되는 조건에 대한 연구는 제한적으로 이뤄졌다. 국내 24개의 연구개발팀을 대상으로 조사한 결과, 팀 다양성, 특히 정보다양성이 팀 창의성에 긍정적인 영향을 주는 것을 증명하였다. 또한, 팀 구성원간 갈등은 팀 다양성과 창의성 사이에서 유의한 매개효과를 발휘하지 못하는 것을 확인하였다. 변혁적 리더십은 정보다양성과 직무 갈등 사이에서 부(-)의 조절효과를 보였다. 예컨대, 변혁적 리더십이 강하면 정보다양성이 높은 팀일수록 직무 갈등이 낮게 나타났다. 저자는 팀 다양성과 창의성 사이에서 갈등의 조절효과를 증명하기 위해서는 특히 동양권 국가에서 보다 면밀한 측정 방법이 요구되며 팀 다양성이 주는 가치(value in diversity)를 높일 수 있는 잠재적 매개변수의 탐색이 필요하다고 제안하였다.