http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김우,정제평 대한토목학회 2011 KSCE JOURNAL OF CIVIL ENGINEERING Vol.15 No.1
This paper describes a practical formulation of Non-Bernoulli-Compatibility Truss Model that has been conceptually derived in the first part of the present study. Not only equilibrium conditions but also some approximations are employed to solve for the unknowns included in the proposed model. By assuming that the ratio of V_a to V remains to be constant along the shear span, the relationship between α and z is mathematically established as an arch shape function. V_m is also approximated to be an empirical value that is equal to the least shear strength defined by Zsutty. The α-chart is made utilizing a nonlinear finite element analysis. The adequacy of the model is examined by test results available in literatures, and the predicted values are shown to be in excellent agreement with the experimental results.
Flexual-Shear Cracking Mechanism in Slender Reinforced Concrete Bems
김우,Kim, Woo Korea Concrete Institute 1998 콘크리트학회지 Vol.10 No.3
이 논문은 직사각형 단면을 갖는 철근콘크리트 보에서 휨전단균열(Flexural-Shear Crack)이 원인을 규명하기 위해 모두 16개의 보를 실험한 결과를 기술한 것이다. 실험에 이용된 콘크리트보는 전단균열에 영향을 준다고 생각되는 몇 가지 요소를 인위적으로 소거 도는 고립되도록 특수하게 제작된 것이다. 이러한 특수보의 실험결과를 같은 재원을 갖는 보통의 정상보의 결과와 직접 비교하여서 그 차이를 분석함으로써 휨전단 균열의 발생원인을 규명하였다. 그 결과, 일반적인 콘크리트보에서의 휨전단균열 발생은 철근과 콘크리트의 경계면의 부착현상과 매우 밀접한 관련이 있는 것으로 나타났다. 또한 발생된 휨전단균열의 안정성은 주철근을 따라 발생되는 수평균열의 크기에 직접적인 영향을 받고 있는 것으로 나타났다. 본 연구에서 나타난 몇 가지 사실은 현재 사용중인 전단설계규준의 근본을 이루는 전단 위험단면개념과는 상반되는 것도 있었다. 실험에서 알아낸 사실을 근거로 전단파괴기구에 대한 새로운 가설을 제안하였다. 이 새 가설은 지금까지 잘 설명되지 않은 휨전단균열의 발생과 진행에 대한 원인 및 과정을 상당히 잘 설명해주고 있다고 생각된다.
김우,김대중,강성후,Kim, Woo,Kim, Dae-Joong,Kang, Sung-Hoo 한국콘크리트학회 1991 콘크리트학회지 Vol.3 No.4
원형(prototype) 철근콘크리트 구조물의 거동을 축소모형실험을 이용하여 연구하기 위해서는 모든 구성재료의 물리적 성질들이 특정상사(similitude)관계 또는 1:1로 복제된 모형재료를 사용하여야 한다. 원형과 모형의 물리적 특성에 관한 상사성에 대해 사전 연구가 되어져야만 축소모형실험결과 해석에 적용할 수 있다. 본 연구는 철근콘크리트 구조물을 축소모형화하는데 따른 구성재료의 물리적 성질과 기본 거동에 관한 문제점들을 파악하고, 개선된 방법을 찾기 위한 것이다. 모형콘크리트에서 발견되는 큰 인장강도를 최소화하기 위해 배합비를 변화시켜서 원형콘크리트에 가장 가까운 모형콘크리트의 제작기법과 모형철근의 표면형태에 따른 거동의 차이를 단순보를 이용하여 연구하였다. When the behavior of a prototype concrete structure is studied through small-scale model experiments, it is necessary to reproduce all significant physical characteristics on either an one-to-one basis or a specific similitude relationship. Any distortion of similitude must be understood and its effect must be predictable. This paper focuses on improved physical modeling techniques for small-scale reinforced concrete structures. Particular emphasis is placed on the development of a model concrete mix to accurately model the important properties of full-scale prototype concrete. Four types of model reinforcement with different bond characteristics are also studied by testing twenty simple beams. The information obtained will be of immediate use to engineers contemplating small-scale modeling of reinforced concrete structures.
김우,정제평 대한토목학회 2011 KSCE JOURNAL OF CIVIL ENGINEERING Vol.15 No.1
An enhanced truss model is presented in the present study. The model is theoretically based on the well-known relationship between shear and the rate of change of bending moment in a reinforced concrete beam subjected to combined shear and moment loads. The new model shows that a new perspective on the shear resistance can be gained by considering the variation of the internal arm length along the span. And the shear resistance mechanism is resolved into three independent base components; arch action,truss action and membrane action. The compatibility of deformation associated to the two actions is indirectly taken into account by employing an empirical factor. Then the base equation of V=dM/dx is numerically formulated so as to clarify the physical basis of the behavior related to beams under combined action of flexure and shear.