http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Characteristics of TVOCs Emissions in New Apartment Buildings : 신축아파트에서 발생하는 TVOC의 방출특성
Shin-Do Kim(김신도),Jeong-Ho Kim(김정호),Jin-Soo Park(박진수),Jeong-Joo Lee(이정주) 한국실내환경학회 2006 한국실내환경학회지 Vol.3 No.2
건축자재는 복잡한 화학물질로 구성되어 있다. 본 연구에서는 신축아파트에서 방출되는 TVOCs(Toatal Volatile Organic Compounds)의 농도를 조사하고, 75일 동안의 방출량 변화특성을 조사하는 것이다. 조사결과 신축 건물의 초기 5일동안의 TVOCs 평균농도 값은 3.768㎍/㎥ 이었다. VOCs에 포함된 주요물질은 톨루엔(toluene), 에틸벤젠(ethylbenzene), m,p-자이렌(m,p-xyene)이었다. 조사된 벤젠(benzene)의 농도는 58㎍/㎥, 톨루엔은 793㎍/㎥, 에틸벤젠 438㎍/㎥, 스틸렌(styrene) 79㎍/㎥, m,p-자이렌 1,210㎍/㎥, o-자이렌 364㎍/㎥을 각각 나타내고 있었다. 이러한 결과는 신축건물로부터 방출되는 주요 VOCs(Volatile Organic Compounds)는 다환족 탄화수소(aromatic hydrocarbon compounds)계열의 재료를 사용하는 건축자재의 영향을 가장 많이 받는 것을 나타낸다. TVOCs 방출강도는 초기에 12,856㎍/㎥으로 매우 높은 수준을 나타내었으며, 이후 시간의 감소에 따라 감소하였다. 조사 대상 주택의 75일 이후 TVOCs 농도는 초기 방출강도의 1/20 수준으로 감소하였다. TVOCs의 방출특성은 건자재 내의 VOCs 농도와 발생과정에 영향을 받는 것으로 판단된다. 건자재 내부에 포함된 VOCs는 느리고 지속적인 과정을 걸쳐 실내로 방출되며, 시간 경과에 따라 저농도를 오랫 동안 서서히 방출하며 감쇄한다. Building materials are composed of very complex chemical compounds. The aims of this paper are to investigate the emission concentrations of indoor pollutants from new apartment house and the emission variation patterns during 75 days. The average value of total volatile organic compounds(TVOCs) concentration was 3,768 ㎍/㎥ in five new apartments. Major VOCs included toluene, ethylbenzene, m,p-xylene and o-xylene. The average concentrations of each compound were measured as : benzene(58㎍/㎥), toluene (793㎍/㎥), ethylbenzene(438㎍/㎥), styrene(79㎍/㎥), m,p-xylene(1,210㎍/㎥), o-xylene(364㎍/㎥). The results indicated that the major VOCs from the new apartment were affected by building products such as on aromatic hydrocarbon compounds. TVOCs emission are characterized as high emission level at initial time (12,856㎍/㎥) and decreased through time. After a lapse of 75 days in sample house, TVOCs concentration decreased in about 20 times as compared with the initial concentration. The TVOCs emission profiles strongly depended on the generation mode and the concentration of the VOCs in building material.
조영증강 초음파 진단에서 파라미터 영상 생성 및 개선 기법
김신해 ( Shin-hae Kim ),이은림 ( Eun-lim Lee ),조은비 ( Eun-bee Jo ),김호준 ( Ho-joon Kim ) 한국정보처리학회 2017 정보처리학회논문지. 소프트웨어 및 데이터 공학 Vol.6 No.4
본 논문에서는 조영증강 초음파 진단시스템에서 유용성과 성능을 개선하기 위한 영상처리 기법을 제안한다. 의료초음파 영상에서 진단 파라미터 데이터를 가시화 하는 방법론으로서 연속적인 픽셀 값을 갖는 전이시간 데이터의 표현과, 4가지 유형의 값으로 분류되는 병변 진단 파라미터 영상을 생성하는 방법을 제시한다. 또한 생성된 파라미터 영상에서 노이즈를 제거하기 위한 방법론으로서 MRF 모델을 이용한 영상개선기법을 제안한다. 이러한 파라미터 영상 생성기법은 초음파 진단 데이터에서 조영증강 패턴의 동적인 변화에 대한 육안 판별의 한계를 극복할 수 있게 한다. 제안된 방법은 원영상에서 영역의 윤곽선을 명확하게 하며 4가지 색상을 통하여 병변의 특성에 관한 시각적 판단을 용이하게 한다. MRF기반 영상개선 과정에서 연속적인 픽셀 값에 대한 에너지함수를 정의하고 이를 최적화 하는 기법을 개발하였으며 실제 의료영상을 사용한 실험을 통하여 제안된 이론의 유용성을 평가하였다. This paper proposes image processing techniques that improve usability and performance in a diagnostic system of the contrast-enhanced ultrasonography. For a methodology for visualizing diagnostic parameter data in an ultrasonic medical image, an expression of transition time data with successive pixel values and a method of generating a lesion diagnostic parameter image with four categorized values are presented. We also introduce a MRF-based image enhancement technique to eliminate noises from generated parametric images. Such parametric image generation technique can overcome the difficulty of discriminating dynamic change in patterns in the ultrasonography. The technique clarifies the contour of the region in the original image and facilitates visual determination of the characteristics of the lesion through four colors. With regard to this MRF-based image enhancement, we define the energy function of consecutive pixel values and develop a technique to optimize it, and the usability of the proposed theory is examined through experiments with medical images.
김신,김소정,남경진,차한솔,윤상옥,Kim, Shin,Kim, So-Jung,Nam, Kyung-Jin,Cha, Hansol,Yoon, Sang-Ok 한국전기전자재료학회 2015 전기전자재료학회논문지 Vol.28 No.7
Sintering, microstructure, thermal conductivity and microwave dielectric properties of xLiF-(1-x)MgO ceramics (x=0.03~0.10 mol) were investigated. The high density was obtained in the specimens of $x{\geq}0.06$, i.e., 0.04 LiF-0.96 MgO in mol, whereas the amount of 0.03 mol LiF was insufficient to densify. From the result that the contact flattening in the sintered specimen was observed, the densification occurred through the liquid-phase sintering. The specimen of x=0.06 showed the highest room-temperature thermal conductivity. Relative density, thermal conductivity, dielectric constant, and quality factor ($Q{\times}f$) of the specimen for x=0.06 sintered at $900^{\circ}C$ for 4 h were 97.8%, $39.2Wm^{-1}K^{-1}$, 9.45, and 14,671 GHz, respectively.
달착륙선 충격흡수장치용 알루미늄 허니콤의 Crush Strength에 관한 연구
김신,이혁희,김현덕,박정선,임재혁,황도순,Kim, Shin,Lee, Hyuk-Hee,Kim, Hyun-Duk,Park, Jung-Sun,Im, Jae-Hyuk,Hwang, Do-Soon 항공우주시스템공학회 2010 항공우주시스템공학회지 Vol.4 No.3
Understanding the crushing behaviour of aluminum honeycombs under dynamic loading is useful for crash simulations of vehicles and for design of impacting energy absorbers. In the study of honeycomb crushing under quasi-static, dynamic loading, the most important parameter is crush strength. Crush strength is indicated to energy absorption characteristic of aluminum honeycomb. In this study, Using Finite Element Analysis carried out crush strength of hexagonal aluminum honeycomb then the results was compared with Quasi-static test. Consequently, Crush strength is different in quasi-static loading and dynamic loading about 16%.
화학 및 천연페인트에서 발생되는 TVOCs의 방출강도 특성 연구
김신도(Shin Do Kim),김정호(Jeong Ho Kim),박진수(Jin Soo Park),이정주(Jeong Joo Lee) 한국환경보건학회 2004 한국환경보건학회지 Vol.30 No.5
Building materials are composed of very complex chemical compounds, and these indoor building materials discharge very much Volatile Organic Compounds(VOCs). We performed the environmental chamber test to investigate the Total VOCs(TVOCs) emission characteristics and emission factors about chemical and natural coating materials. As the result, we concluded that TVOCs emission are high at initial time and decreased in course of time. Natural paint was low emission level for TVOCs than chemical paint by small chamber test. The TVOCs emission factor-time profile showed a good fit with the results from the measured and predicted value.