http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
다양한 제조방법으로 제조된 V<sub>2</sub>O<sub>5</sub>-TiO<sub>2</sub> 촉매를 이용한 제련공정에서 발생한 황화수소 제거능 비교
김문일,Kim, Moon il 한국환경과학회 2021 한국환경과학회지 Vol.30 No.6
V<sub>2</sub>O<sub>5</sub>-TiO<sub>2</sub> catalysts were prepared by various methods. V<sub>2</sub>O<sub>5</sub>-TiO<sub>2</sub> were prepared by sol-gel method with different drying conditions (aerogel and xerogel), and V<sub>2</sub>O<sub>5</sub> supported on TiO<sub>2</sub> obtained by sol-gel method with precipitation-deposition method and impregnation method. The performance of the V<sub>2</sub>O<sub>5</sub>-TiO<sub>2</sub> catalysts was investigated for the selective oxidation of hydrogen sulfide in the stream containing both ammonia and excess water. All the catalysts showed good dispersion of vanadium and they had high H<sub>2</sub>S conversion with no or little production of sulfur dioxide. The V<sub>2</sub>O<sub>5</sub>-TiO<sub>2</sub> aerogel catalyst prepared by sol-gel method with drying under super critical condition had the highest surface area which led to better catalytic activity compared to those by other synthesis methods.
金文一 대한치과기재학회 1971 대한치과재료학회지 Vol.5 No.1
금속은 일상생활에 있어서 여러 방면에 사용되고 있으며 그 용도에 따라서 강도, 경도, 비중, 광택, 용해도, 패창율 전기 및 열의 전도도, 공기 또는 화학 약품에 대한 인식성등, 여러 가지 성질에 관해서 다양으로 요구되는 것이다. 따라서 순수한 금속에서는 이들 성질 가운데 몇 개의 항목에 관해서 합격된다 하더라도 그와 동시에 요구되는 다른 성질 전부를 만족 시킨다는 것은 대단히 어려운 일이다. 금속원소의 수에는 한계가 있음으로 전술한 바와 같은 여러 가지의 요구에 만족하게 응한다는 것은 불가능한 것이 당연한일이다. 따라서 합금(2성분 또는 2성분 이상의 다성분으로된 혼합금속)을 만들므로서 어는 정도까지는 이들 요구에 응할 수 있게 되는 것이다. 따라서 합금이란 2종 이상의 금속 또는 금속와 비금속으로 합성된 것으로 이들이 금속적인 성질을 구비한 것 이라고도 할 수 있을 것이다. 합금의 성질은 합금을 이루고 있는 각 성분금속의 종류에 따르는 것은 물론이고 동일성분의 합금이라 할지라도 성분상호간의 비율 및 온도에 따라서 변화하게 된다. 따라서 요구되는 성질을 구비한 합금을 얻으려면 어떤 금속을 어떤 비율로 혼합시키고 이것을 어떤 과도에서 열처리 해야하는가 또한 어떤 온도에서 가공해야 되는가 하는 문제가 생기게 된다. 이 문제에 적당한 해결책을 지시해 주는 것이 합금상태도(phase diagram)라는 것이다. 다라서 금속재료의 성질을 알려면 이 재료에 관한 합금상태도를 완전히 이해함으로써 그 재료의 성질을 이관하게 되는 것이다.
Sn-Ag-X계 무연솔더 접합부의 미세조직 및 전단강도에 관한 연구
김문일,문준권,정재필 대한용접접합학회 2002 대한용접·접합학회지 Vol.20 No.2
Many kinds of Pb-free solder have been investigated because of the environmental concerns. Sn-Ag-Cu system is well blown as most competitive Pb-free solder. However, since Sn-Ag-Cu system has relatively high melting point compared to Sn-Pb eutectic, it may a limitation, the some application. In this study, Bi and In contained solder of $Sn_3Ag_8Bi_5In$ which has relatively lower melting point, $188~204^{\circ}C$, was investigated. $Sn_3Ag_8Bi_5In$ solder ball of $500\mu\textrm{m}$ diameter was set on the Ni/Cu/Cr-UBM and reflow soldered in the range of $220~240^{\circ}C$ for 5~15s. The maximum shear strength of the solder ball was around 170mN by reflowing at $240^{\circ}C$ for 10s. Intermetallic compound formed on the UBM of Si-wafer was analysed by SEM(scanning electron microscope) and XRD(X-ray diffractometer).