http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
시멘트 모르타르에서 잔골재를 갯벌로 대체한 모르타르의 특성
강윤영 ( Kang Yun-young ),이슬비 ( Lee Seul-bi ),양성환 ( Yang Seong-hwan ) 한국건축시공학회 2016 한국건축시공학회 학술발표대회 논문집 Vol.16 No.2
In the current construction market usage cement and aggregate is increasing continuously. This is progressing serious environmental pollution due to the carbon dioxide generated during cement production. Further, by using a large amount of aggregate, they tend to have even reduced natural resources. As a result, the reduction of carbon dioxide through the United Nations Framework Convention on Climate Change, the energy saving has been positioned as a global trend. Therefore, in this study, instead of fine aggregate fix the cement, by the use to increase the proportion of the tidal flats, to try to reduce the amount of cement and fine aggregate. Accordingly, according to increasing the proportion of the mud flat be analyzed for properties the compressive strength, tensile strength, flow, chloride test, workability of the mortar.
울진 원자력발전소 온배수를 이용한 재생식 해양온도차발전에 대한 연구
강윤영(Yun-Young Kang),박성식(Sung-Seek Park),박윤범,김남진(Nam-Jin Kim) 대한설비공학회 2012 설비공학 논문집 Vol.24 No.7
For the past few years, the concern for clean energy has been greatly increased. Ocean thermal Energy Conversion(OTEC) power plants are studied as a viable option for the supply of clean energy. In this study, we examined the thermodynamic performance of the OTEC power system for the production of electric power. Computer simulation programs were developed under the same condition and various working fluids for closed Rankine cycle, regenerative cycle, Kalina cycle, open cycle, and hybrid cycle. The results show that the regenerative cycle showed the best system efficiency. And then we examined the thermodynamic performance of regenerative cycle OTEC power system using the condenser effluent from Uljin nuclear power plant instead of the surface water. The highest system efficiency of the condition was 4.55% and the highest net power was 181 MW.
갯벌의 콘크리트용 혼화재 및 채움재로서의 활용가능성에 대한 기초적 연구
양성환 ( Yang Seong-hwan ),강윤영 ( Kang Yun-young ) 한국건축시공학회 2016 한국건축시공학회지 Vol.16 No.6
본 연구에서는 갯벌의 콘크리트용 혼화재 및 채움재로써의 활용 가능성에 대한 기초적 연구를 실시하였다. 먼저, 혼화재로서의 활용 가능성에 대해 화학 성분 분석을 실시한 결과 잠재수경성 및 포졸란 반응에 필요한 성분들이 함유되어있었지만 플라이애시 및 고로슬래그의 성분 분석 결과와 비교한 결과 성분 함유량이 소량으로 반응을 하기에는 부족한 양이었다. 또한, 물리적 실험 분석 결과 갯벌 치환율이 증가할수록 압축강도 및 인장강도가 감소하는 것으로 나타났다. 따라서 갯벌의 혼화재로서의 활용 가능성은 화학 성분분석에서 예상한 결과와 마찬가지로 낮은 것으로 나타났다. 채움재로서의 활용 가능성에 대한 시험을 실시한 결과 재령28일 압축강도를 측정한 결과 갯벌의 채움재로서 활용가능성에 대한 분석을 통해 갯벌 치환율 10~30% 까지 벽돌의 압축강도 기준인 8MPa 이상의 강도를 발현하여 벽돌 등2차 제품에 활용 가능할 것으로 판단되며, 향후 벽돌제작 등의 추가적인 실험이 필요할 것으로 판단된다. 플로우 시험결과에서는 갯벌 치환율이 증가할수록 플로우 값이 감소하는 것으로 나타났으며, 염화물 함유량 분석 결과를 통해 갯벌 자체의 염분 함유량이 많아 갯벌을 치환할 경우 철근 사용구조물에는 적용하기에는 부적합한 것으로 판단되며, 내장벽돌 등 철근을 사용하지 않는 제품에 활용이 가능할 것으로 판단된다. Recently, review on viability of various industrial by product and natural materials as raw material for concrete has been actively done in aspect of environment-friendly issue and depletion of natural resource. This study conducted fundamental study on the possibility of utilizing mud flat as admixture and filling material for concrete. First, chemical analysis on the viability of mud flat as admixture was done and the researchers compared it with the substance of fly ash and blast furnace slag. According to the result, substance content was proven to be inadequate. In addition, as the replacement rate of mud flat increased, compressive strength and tensile strength decreased. According to the estimated result of chemical substance analysis, possibility of utilizing mud flat as admixture was low. According to the result of experiment done as filling material, 10% ~ 30% replacement rate of mud flat manifested more than 8 ㎫ of compressive strength of block which may be utilized for secondary product. However, additional experiment such as making block is required afterward. According to the result of flow experiment, as the replacement rate of mud flat increased, flow value decreased, and through chloride content analysis test, it was proven that mud flat is inappropriate to be applied as steel beam using structure since it has high content of sodium. It may be utilized as products that does not use steel beam such as internal brick.