http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최원일 강원대학교 교육대학원 2006 국내석사
Raising a child to a soccer player brings up much concern from neighbors. Furthermore the player himself and his parents live a uneasy life from uncertain future. The identity of a middle school student as a soccer player is entirely different from normal students. This research the results are these studies 'The process of confidence formation as a successful soccer player's through Phenomenology ( the interpretation of photography) The results are as follows. 1. The student's disposition of sense, perception is connected with soccer. Photographs and data reveals the student's fantasy, joy and anxiety. 2. The student successfully adjusted himself to soccer team(the same area of objectivity) however fail to win the ultimate victory(his pursuing goal) 3. Though the student had much more actual match experiences, he revealed the same level of anxiety when his colleagues of Joong-ni Middle showed those. 4. In School Culture, the principal's interest and concern have much effect on the school soccer team. 5. The student's motive to recognize his possibility as a soccer player was from the coach of Won-ju Technical High School. Furthermore it became a turning point to the student. 대한민국에서 자녀를 축구선수로 키운다는 것은 주위로부터 많은 우려를 받을 수 있으며, 당사자들은 불안 속에서 일상생활을 한다. 한 중학생이 축구체험을 통하여 형성되어지는 정체성은 분명 학교생활에서 공부하는 중학생들과는 다를 것이다. 연구자는 참여자가 ‘축구선수로 성공할 수 있다’라는 의식의 형성과정을 현상학 방법(사진해석)으로 기술하고, 해명한 결과 다음과 같은 결과를 얻었다. 1. 감각, 지각의 지향성은 축구와 연관이 되었고, 기억되어진 사진 및 관찰 자료부터 파악된 것은 판타지, 즐거움, 불안이었다. 2. 참여자가 객관화의 동질적 영역에(축구부) 흡수는 되었지만, 지향적 대상인 승리의 결과물(우승)을 얻는데 실패하였다. 3. 실전경험이 중리중 동료들보다 풍부한 참여자도 팀 구성원들의 다수 심리적 상태(불안)에는 같은 불안을 보였다. 3. 학교문화에서 학교장의 관심과 배려는 그 학교 축구부에 미치는 영향력이 큰 것으로 파악 되었다. 4. 참여자가 축구선수로서 가능성을 인식하는 계기는 타자로서 원주공고 지도자와의 연관이었으며, 전기(turning point)가 되었다.
경북북부지역의 제조업 중업종별 재해율과 작업능력지수와의 연관성 분석
As our country is becoming an aged society, it is presumable that the incident rate will increase due to the decreasing work ability of aged workers and we need a solution to compromise this situation. This thesis tried to find a way of using the Work Ability Index (WAI) as a tool to prevent work-related injuries in various manufacturing industries. It was hypothesized that the possibility of being injured during work is increasing as the WAI of an individual worker is getting lower. To validate the hypothesis, the incident rate and the WAI’s from 409 workers were gathered from a few manufacturing companies around the North Gyeongbuk area. The companies and the workers were then divided into different groups by their types of manufacturing industries, business scales of the companies, and age and working history of the workers. The incident rate and the WAI’s within each group were compared with those of other groups using one-way ANOVA. The results showed that there is a meaningful relationship between the incident rate and the average WAI’s among the groups. For the types of industries, the metal processing industry showed the highest incident rate, and the WAI’s of the workers was significantly lower than those of the chemical and the electronics industry. The WAI’s of the workers from small-sized companies that have less than 50 employees was significantly lower than other groups, and the incident rate of this group was the highest among the business scales. The WAI’s of the workers decreased as the age of the workers increased, especially for the group of workers in their 50’s which showed the highest incident rate. Though the WAI is basically a measure of subjective difference in working ability among workers, it might be affected not only by internal factors (age and working history) along the worker but also by external factors that change the workload. From the above, it was concluded that the WAI is a positive tool to assess the possibility of being injured due to work for an individual at a given task condition. To manage the incident rate of manufacturing industries in forthcoming aged society, the WAI’s of workers should be maintained at least in moderate level. The internal and external factors that change the WAI’s of workers need to be controlled carefully to achieve this goal.
In the domestic construction industry accounted for the majority of the materials used in concrete, such as calcination and drying shrinkage at early age concrete internal moisture due to evaporation and move on, the shrinkage phenomenon occurs. If you do not restraint, the crack does not occur, these shrinkage cracking of concrete and concrete structures, foundation or other structural elements in concrete rebar by Subject. Redemption of these contraction-induced tensile stress and degrade the durability of concrete cracks when the tensile stress reaches the tensile strength of the concrete. However, the recent construction of the structure, and the size and shape of a large, compared the case of ready-mixed concrete construction and the poor quality of the concrete used in the production of raw materials to be only improve the workability for the unit to increase the number of structures of concrete drying shrinkage more in common. The low strength of concrete at early age also reduces resistance to contraction cracking occurs at high risk. Crack from the initial point defect that occurs after these initial crack, as well as reduce the ability of structures to withstand loads can increase rapidly. Permeability of concrete / concrete neutralizing speculative reduced CO2, salinity, due to the penetration of moisture to accelerate the initial defects of the concrete case of reinforced concrete rebar corrosion accelerates the deterioration of the structure will accelerate sikige. In addition, the drying shrinkage of the concrete tensile stress evaporate as occurs when excess moisture in concrete can not have a major impact on the structural safety, and to ensure the safety of the structure will result to a very dangerous situation, since causing the economic problems caused by the repair / reinforcement. Think that is very important to supplement such problems and improve the quality of concrete in order to control drying shrinkage cracking. Expansive Additives of the few ways to reduce the quantity of concrete on the unit, generated by mixing the effectiveness of Lin Xi Fuerteventura's expansion by a variety of ways to solve the problems of the above can be considered to reduce the drying shrinkage several ways, including by incorporation by the way, Shrinkage Reducing shrinkage compensation effect due to the decrease of the capillary tension, Expansive Additive and Shrinkage Reducing complex mixed methods, in addition to changes in the cement and mineral admixture is used. This way, but the drying shrinkage reduction of up to 25 percent cause restrictions on usage, sikimyeo big enough to worry about without the deterioration of the concrete structure due to the effect of the excessive expansion or deformation of the entrained air destroyed by freezing and thawing deterioration causing problems such as is holding. In this study, new concrete drying shrinkage cracks and the effect of the reduction on the basis of the results of existing studies of admixture that can compensate drawbacks as a Mineral Admixture of Concrete - PART basic properties through experiments to examine the performance of purpose was to test results can be summarized as follows. 1) elements of mixed concrete flow characteristics as determined to meet goals in a slump the elements of honipryang was identified as representing the equivalent properties to be small for the usage of superplasticizer increased. After field application and specifications need to be suitable for each condition to determine the amount of formulation changes. 2) elements incorporated as Concrete Admixtures Unit Quantity (W) in substitution to fit the feed conditions were established in this study of the W / C ratio and the ratio of fine aggregate, and the substitution rate 75% relatively to the appropriate appeared. 3) concrete to determine the epidemiological characteristics, and results of some of the compressive and tensile strength tend to degrade with increasing element of long-term phenomenon, which is low due to hydration heat curing the numbers that satisfy the design strength in all conditions. appeared. 4) elements showed that the cement hydration will be shut down until the reduction of delay and cause condensation heat of hydration, high-performance continuous endothermic reaction immediately after rubbing. Future research accumulated and be able to apply through the concrete in hot weather, and the mass of the concrete is considered. 5) the elements proposed honipryang increased the drying shrinkage reduction effect appeared, and showed an increase in high-performance. For Concrete Admixtures develop existing agricultural and industrial elements that were used to study the main cause of concrete cracks in the high heat of hydration and drying shrinkage showed outstanding performance. As eco-friendly materials at large-scale projects such as the W/C ratio, unit quantities, such as are used in several formulations for examine and review in accordance with the outdoor temperature and if domestic and foreign harsh thermal environment changes in the future binder area or mass member should be applied. 국내의 건설 산업에서 사용재료의 대부분을 차지하고 있는 콘크리트는 초기재령에서 콘크리트 내부 수분의 증발 및 이동으로 인한 소성 및 건조수축 등의 수축현상이 발생한다. 이러한 콘크리트의 수축균열은 구속되지 않을 경우 균열이 발생하지 않으나, 콘크리트 구조물은 기초나 다른 구조요소 또는 콘크리트내의 보강철근에 의해 구속을 받게 된다. 이러한 수축작용의 구속은 인장응력을 유발시키며, 이 인장응력이 콘크리트의 인장강도에 도달할 때 균열이 발생되어 콘크리트의 내구성을 저하시키는 원인이 된다. 그런데, 최근의 건설 구조물은 크기와 형태가 대규모화 되고 있는데 비하여, 콘크리트 제조용 원재료의 품질은 열악해지는 상황이고, 레미콘 시공의 경우도 작업성 향상만을 위한 단위수량의 증가로 구조체 콘크리트의 건조수축은 더욱더 많이 발생하고 있는 실정이다. 특히 초기재령의 콘크리트는 강도가 낮아 수축에 대한 저항성이 떨어지므로 균열발생 위험이 높다. 이러한 초기균열은 구조물이 하중에 견디는 능력을 감소시킬 뿐만 아니라 균열 초기 시점부터 이후 발생하는 결함을 급속하게 증대시킬 수 있다. 콘크리트의 초기 결함은 콘크리트의 투수/투기성을 저하시켜 CO2, 염분, 수분의 침투로 인해 콘크리트 중성화를 가속화 하고 또한 철근콘크리트 의 경우 철근부식을 촉진시켜 구조물의 열화를 가속화시키게 된다. 또한, 콘크리트 내 수분이 증발함에 따라 발생되는 건조수축 변형이 콘크리트의 인장응력을 초과하였을 시, 구조 안전성에 커다란 영향을 미치게 되고, 구조물의 안전을 보장할 수 없는 매우 위험한 상황까지 초래하게 되며, 이후 보수/보강에 의한 경제성 문제를 유발시킨다. 이와 같은 문제점을 보완하고 콘크리트 품질을 보다 향상시키기 위해서는 건조수축 균열을 제어하는 것이 매우 중요하다고 생각되어진다. 위의 문제점들을 해결하기 위한 다양한 방법들이 고려될 수 있는데, 그 중 몇 가지 방법들로 콘크리트에 단위수량을 줄이는 방법, 팽창재를 혼입하여 생성된 에트린자이트의 팽창효과를 이용하여 건조수축을 줄이는 방법, 수축저감제를 혼입하여 모세관 장력의 감소로 인한 수축보상효과를 이용한 방법, 팽창재와 수축저감제를 복합 혼입하는 방법, 그 외에도 시멘트 및 혼화재료의 변화 등의 여러 방법들이 사용되고 있다. 하지만 이 방법은 사용량에 제한을 유발시키며, 건조수축 저감율이 최대 25% 정도로 크지 않고, 과도한 팽창 효과로 인한 구조물의 변형이나 연행공기 소멸에 의한 동결융해 저항성 저하로 콘크리트의 열화를 발생시키는 등의 문제점을 안고 있다. 이에 본 연구에서는 콘크리트 건조수축균열의 저감효과와 기존 혼화재료의 연구결과를 바탕으로 단점을 보완할 수 있는 새로운 혼화재료로서 요소제를 혼입한 콘크리트의 기본 물성을 실험을 통하여 그 성능을 검토하는 것을 목적으로 하였으며 시험결과를 요약하면 다음과 같다. 1) 요소 혼입 콘크리트의 유동특성을 확인한 결과 목표한 슬럼프에 맞추기 위해서는 요소의 혼입량이 증가할수록 고성능 감수제의 사용량을 적게 하여야 동등한 물성을 나타내는 것으로 확인되었다. 이후 현장적용 및 시방배합 변경 시 각 조건에 적합한 사용량을 확인할 필요가 있을 것으로 판단된다. 2) 콘크리트 혼화재료로서 요소를 혼입할 시에는 단위수량(W)에 치환하는 것이 적합하다고 사료되며, 본 연구에서 설정한 W/C비 및 잔골재율 등의 조건에서는 치환율 75%가 상대적으로 적합한 것으로 나타났다. 3) 콘크리트 역학 특성을 확인할 결과 요소의 혼입량이 증가할수록 압축 및 인장강도가 일부 저하되는 경향을 나타냈으나, 이는 낮은 수화발열로 인한 현상으로 장기재령에서는 모든 조건에서 설계기준강도를 만족하는 수치를 나타났다. 4) 요소는 비빔 직후부터 시멘트 수화가 종료되기까지 지속적 흡열반응을 일으켜 응결지연과 수화열 저감 성능이 우수한 것으로 나타났다. 이는 향후 축적된 연구를 통해 서중콘크리트 및 매스콘크리트의 적용이 가능할 것으로 판단된다. 5) 요소제의 혼입량이 증가할수록 건조수축 저감효과가 크게 나타났으며, 요소제의 단일효과와 더불어 팽창재와의 복합혼입 시 높은 성능증가를 나타냈다. 기존 농업용 및 공업용으로 사용되었던 요소를 콘크리트 혼화재료로 개발하기 위한 연구로 콘크리트 균열의 주원인이 되는 높은 수화열과 건조수축에 있어 뛰어난 성능을 나타내었다. 친환경성 재료로서 향후 결합재의 변화, W/C비, 단위수량 등 사용되는 여러 배합에 대한 검토와 외기온도에 따른 검토 등이 추가 수행된다면 국내·외 열적환경이 열악한 지역이나 매스부재 등 대형공사시 적용이 가능할 것으로 판단된다.
바이오에탄올 생산을 위한 Laminaria japonica의 알긴산 분별 및 전처리 공정 최적화
본 연구에서는 다시마로부터 알긴산 분별 및 전처리 공정의 최적화에 대한 연구를 수행하였다. 먼저, 최적화하는데 필요한 공정 변수의 설정과 각 변수들의 영향에 대하여 조사하였다. 동일한 반응조건에서 알긴산나트륨 농도별 실험을 통하여 알긴산과 HPLC에서 확인된 크로마토그램 Unknown A, B, C와의 상관관계를 확인하였으며, 이를 토대로 하여 HPLC 분석을 이용한 알긴산의 새로운 정량법에 대한 실험을 진행하였다. 반응조건은 CS (Combined Severity)로 수치화하고 알긴산의 각 농도별 실험과 일정 농도에 대한 CS별 실험 결과를 Unknown A, B, C의 RI (Refractive Index)값과 농도, CS에 대하여 각각 그래프로 나타내었다. 이 중 상대적으로 경향성 있는 Unknown B를 이용하여 개발한 새로운 정량법을 다시마로부터 추출된 알긴산에 적용하기 위한 미지농도별, CS별 실험을 진행하였다. 추출된 알긴산의 실제 농도는 PHMBH+Cl- 정량법을 이용하여 측정하였으며, 실제 농도값의 10%를 오차범위로 설정하고 새로운 정량법에 적용한 결과, 오차 범위 안에 약 70% 정도의 실험군이 일치하는 것을 확인할 수 있었다. 하지만 다시마에 적용해 본 결과, 정량법에 적용할만큼의 오차범위에 들어오지 않았으며, 그 이유는 다시마의 여러 가지 구성 성분에 의해 동일한 CS에서 반응이 다르기 때문으로 판단된다. 결과적으로 다시마에 적용하기 위해서는 여러 가지 실험을 통한 보정 계수로 보정해 주어야 할 필요가 있다. 다시마로부터 알긴산 분별 및 전처리 공정의 최적화를 위한 실험에서 새로운 정량법은 적용할 수 없었지만, 추출된 알긴산과 알긴산나트륨의 농도별 실험으로 HPLC 크로마토그램 분석과 Unknown B와의 상관관계를 확인하였기에 이를 토대로 분별 및 전처리 공정에서의 종속변수를 Unknown B로 설정하여 최적화 실험을 수행하였다. 기본적인 실험을 통하여 기질 크기, 고액비, 촉매를 각각 8 mesh, 1:15, Na₂CO₃ 수용액으로 결정하여 분별 공정 최적화 실험을 진행하였다. 반응표면분석법에 의해 다시마로부터 알긴산 분별 공정의 최적 조건을 결정하였으며, 반응온도 138.7℃, 반응시간 35분, Na₂CO₃ 수용액 농도 6.81%의 최적 조건을 확인하였다. 최적 반응시간을 기준으로 5분 간격, 0~45분 범위로 최적 조건 실험을 수행하였으며, 35분에 Unknown B RI 값이 2055506으로 최적 조건임을 확인하였다. 알긴산 분별된 다시마의 H₂SO₄ 수용액을 이용한 묽은산 전처리 후 잔류고체물의 글루칸 함량은 분별된 다시마보다 약 2배이상 높고, 처리되지않은 다시마보다는 약 10배이상 증가한 약 59%를 확인하였다. 전처리 공정의 필요성을 확인하기 위하여 효소 소화도를 확인하였으며, 알긴산 분별 후 다시마보다 분별 후 2.0% H₂SO₄ 수용액을 이용하여 묽은산 전처리된 기질에서 가장 높은 99.17%인 ED 값을 확인하였다.
현장시험법을 통한 인천지역 해성퇴적토의 전단파속도 특성 고찰
구조물이나 건축물의 내진설계에 대한 요구가 빈번해지고 있는 현시점에서 지반에 대한 전단파 속도의 중요도 및 정확한 평가 필요성이 현저하게 증가되고 있다. 특히, 현장시험 방법별로 각기 다른 전단파 속도 범위를 나타내고 있어, 단일 시험법 수행시 전단파 속도 측정에 대한 오류를 범할 수 있으며, 다양한 시험법을 적용할 경우에는 많은 비용과 시간이 소요되는 번거로움이 존재한다. 따라서, 각 지반에 적합한 현장시험법 선정 및 토질특성별 전단파 속도 측정에 대한 많은 연구가 필요하다. 본 연구에서는 지반강도 및 토질특성을 평가한 후 해당 지점에 대한 전단파 속도를 비교․분석하였다. 지반강도는 표준관입시험과 콘관입시험을 통하여 해당지점별로 산정된 N-value, 콘관입저항치(qc) 값을 토대로 연구지역 지반강도를 분류하였으며, 토질특성은 CPT시험결과와 실내시험 결과를 기초로 하였다. 지반강도에 따라 SPS검층과 SCPT를 통하여 측정된 전단파 속도는 N-value<20 이하의 지반에서는 유사하게 측정되나, N-value>20이상으로 갈수록 SPS검층을 통해 측정된 전단파 속도값이 SCPT를 통해 측정된 전단파 속도값보다 높게 측정되는 결과를 보였다. 또한, SPS검층과 SCPT로 측정된 전단파 속도는 심도변화에 따른 영향이 미미한 것으로 나타났다. 이러한 결과로 보면 다운홀 기법은 지반강도의 변화가 심하고, 흙 입자간의 간격이 조밀한 지반일수록 적용이 어려울 것으로 보이며, 본 연구결과와 비교하였을 때, 국내에서 많이 사용되는 Imai(1982)식은 해성퇴적토에는 적합하지 않는 결과를 보였다. 따라서 국내지반에 적합한 N-value별 전단파 속도의 범위를 나타낼 수 있는 경험식이 필요할 것으로 판단되어, 인천지역 해성퇴적토를 대상으로 현장에 적합한 제안식을 도출하고자 하였다. 향후 많은 연구지역을 토대로 시험별 측정결과를 분석할 경우, 국내지반에 적합한 현장시험기법 선정과 해성퇴적토의 전단파 속도 범위를 산정하는데 도움이 될 수 있을 것으로 판단된다. Under situation that the demanding of the earthquake resistant design of structure is maximized, the need of importance and exact evaluation about the S-wave velocity of soil is raised. Especially, because each field test method shows the different S-wave velocity range, the accomplisher of the only one field test can make an error about the measure of the S-wave velocity range. In this study, S-wave velocity range is gauged in every field test method at the total 5 locations in the marine deposits in Incheon area. field test method is accomplished the SPT(Standard Penetration Test), CPT(Cone Penetration Test), SPS(Suspension PS Logger), SCPT (Seismic Cone Penetration Test) and so on. The S-wave velocity of SCPT in the downhole test method is measured lower than SPS logger at the N-value > 15 range. But at the N-value < 15 range, SPS logger and SCPT result is measured same. In this result, although the soil strength of the downhole test method increased, the rate of S-wave velocity is tend to be slowed. This result shows that the downhole test is difficult to apply at the place that the intensity of soil is more extreme and harder soil. And it shows that the existing Imai(1982) type that is mostly used within the country is not suitable for the marine deposits. Thus, the empirical formula that can show the range of S-wave velocity in each N value for domestic soil is needed. And this study draws the empirical formula that is suitable at the field in The Marine Deposits in Incheon Area.